2019 Nissan Titan Paint Color Codes & Touch-Up Guide

Whether you are covering up a minor scratch from a parking lot or repairing rock chips from the highway, getting the exact paint match for your truck is critical. This guide provides a comprehensive look at the factory paint colors for the 2019 Nissan Titan, helping you identify your exact paint code, locate the information on your vehicle, and successfully apply touch-up paint for a flawless finish.

Quick reference

Below is the factory paint color chart for the 2019 Nissan Titan. Always verify your specific paint code on your vehicle before ordering any touch-up paint, as some colors look incredibly similar but have vastly different formulations.

(Note: If you are uncertain of your exact color or your truck has a custom fleet color, always confirm your code via your VIN at a local Nissan dealer or auto paint supplier.)

Where to find your paint code

Nissan makes it relatively easy to find your factory paint code. For the 2019 Nissan Titan, you will need to locate the Vehicle Identification Number (VIN) and information sticker, often called the "Service Parts Identification" or compliance label.

1. Driver’s Side Door Jamb: Open the driver's side door and look at the latch pillar (the B-pillar) or the door edge itself. You will see a black or white sticker containing barcode information, the VIN, and tire pressure data.
2. Reading the Label: Look towards the bottom center or right side of this label for a section marked "COLOR" or "C/TR" (Color/Trim).
3. The Code: You will see a three-character code matching the table above (e.g., KAD for Gun Metallic).

If your sticker is missing, faded, or damaged, simply call the parts department at your local Nissan dealership. Give them your VIN, and they can pull the exact factory paint code your truck was built with.

Best touch-up paint sources

Getting the right paint is the first step to a successful repair. Here are the most popular and reliable sources for 2019 Nissan Titan touch-up paint:

• AutomotiveTouchup: Known for highly accurate, custom-mixed paints based on factory formulations. They offer paint pens, brush-in-bottle, and aerosol spray cans, making them an excellent choice for larger repairs or tri-coat colors.
• Dupli-Color: A highly accessible brand found at most local auto parts stores (AutoZone, O'Reilly, Advance Auto). Their Exact-Match line is great for standard metallics and solids like Glacier White (QAK) or Brilliant Silver (K23).
• Nissan Dealership Parts Department: Going straight to the dealer is often the best route for paint pens, especially for complex pearl colors. OEM touch-up pens often feature an abrasive prep tip, the color base, and a clear coat applicator in one unit.
• Tcoat & Custom Mixers: If you are dealing with faded paint, online custom mixers can sometimes adjust the formula to account for UV degradation, though this is usually best handled by a professional body shop.

How to use touch-up paint

For minor scratches and rock chips, follow these steps to achieve a durable and visually pleasing repair:

1. Clean the Area: Wash the damaged area with soap and water, then wipe it down with wax and grease remover or rubbing alcohol. There must be no dirt or wax in the chip.
2. Apply Primer (If Bare Metal is Exposed): If the scratch goes all the way down to the metal, apply a tiny dab of automotive primer. Let it dry completely.
3. Apply the Base Coat: Shake your touch-up paint vigorously. Apply the paint in light, thin layers using a fine-tipped brush, a toothpick, or the pen applicator. Do not flood the chip; you want to build the paint up gradually. Wait 15-20 minutes between coats.
4. Apply the Clear Coat: Once the base coat is dry (usually after 30-60 minutes), apply a layer of clear coat to protect the paint and give it a glossy finish that matches the surrounding area.
5. Level and Polish: After the clear coat has cured for several days, you can use a fine polishing compound to gently level the repair and blend it with the surrounding clear coat.

Color matching tips for pearls and tri-coats

If your Titan is painted in Pearl White (QAB), be prepared for a slightly more involved process. Tri-coats consist of three layers: a solid base coat, a translucent pearl mid-coat, and a protective clear coat.

When touching up tri-coats, you must apply the base color first, followed by the pearl mid-coat. The tricky part is that the final color changes depending on how many layers of pearl you apply. Always practice on a piece of scrap metal or heavy cardboard first. Count how many passes of the pearl mid-coat it takes to match your truck's finish before applying it to the vehicle. For larger metallic panels, remember that metallic flakes can lay differently depending on the spray angle, which is why professional blending is often recommended for anything larger than a quarter.

When a touch-up pen just won't cut it for large scrapes or deep gouges, it’s time to call in the professionals. Find a trusted body shop on Repairius.