2014 Peterbilt 579 Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2014 Peterbilt 579? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 450-500 / 610-678 | Retorque after 50-100 miles. |
| Oil Drain Plug | 65-75 / 88-102 | Paccar MX-13 engine. |
| Transmission Drain Plug | 38-45 / 52-61 | For Eaton Fuller transmissions. Check your specific model. |
| Brake Caliper Bracket Bolts | 160-180 / 217-244 | For air disc brakes. Varies by brake manufacturer. |
| Brake Caliper Slide Pins | 60-70 / 81-95 | For air disc brakes. Lubricate with high-temp brake grease. |
| Steer Axle Nut | 250-350 / 339-475 | Dependent on axle model and bearing type. |
| Drive Axle Nut | See notes | Highly variable based on axle manufacturer (e.g., Dana, Meritor). Consult service manual. |
| Valve Cover Bolts | 25-30 / 34-41 | Paccar MX-13 engine. Tighten in sequence. |
| Intake Manifold Bolts | 30-35 / 41-47 | Paccar MX-13 engine. |
Wheel Lug Torque Pattern
For the 2014 Peterbilt 579's 10-lug hub-piloted wheels, use a star or cross pattern to ensure even clamping force. Start with any lug nut, snug it down, then move to the nut directly opposite. Continue this pattern, moving to the nut two positions over, until all lug nuts are snugged. Finally, bring all lug nuts to their final torque specification in the same star pattern. This process minimizes the risk of wheel distortion and ensures the wheel is properly centered on the hub.
Brake Torque Notes
The torque specifications for brake components, especially on a heavy-duty truck like the Peterbilt 579, are critical for safety. The values provided are for common air disc brake setups, but always verify the exact specification for your truck's brake system, as it can vary by manufacturer (e.g., Bendix, Meritor). When servicing the brakes, it is essential to clean all mounting surfaces and threads before applying the correct torque. Use a calibrated torque wrench for these critical fasteners.
Why Torque Matters
Applying the correct torque to fasteners is not just about making them "tight." It is about applying the correct amount of clamping force to hold a joint together. Over-torquing can stretch and damage fasteners, leading to failure. Under-torquing can allow components to loosen over time, which can have catastrophic consequences, especially with critical components like wheels and brakes. Using a calibrated torque wrench and following the manufacturer's specifications is a fundamental aspect of safe and reliable truck maintenance.
Disclaimer: The torque specifications provided in this article are for general reference only. Always consult the OEM service manual for your specific vehicle for the most accurate and up-to-date information. Critical fasteners should always be torqued to the manufacturer's exact specifications.
Find a trusted shop on Repairius.
More specs for the 2014 Peterbilt 579
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2014 Peterbilt 579 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.