2021 Peterbilt 579 Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2021 Peterbilt 579? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 450-500 / 610-678 | Always use a calibrated torque wrench and follow the proper tightening pattern. |
| Oil Drain Plug | 50-60 / 68-81 | Varies by engine option (PACCAR MX-13, Cummins X15). Always use a new gasket. |
| Transmission Drain Plug | 30-40 / 41-54 | Varies by transmission model (Eaton, Allison). |
| Brake Caliper Bracket Bolts | 180-220 / 244-298 | Use new or properly cleaned and inspected bolts. Apply threadlocker as specified. |
| Brake Caliper Slide Pins | 60-70 / 81-95 | Lubricate with high-temperature brake grease. |
| Axle Nut | 1200+ / 1627+ | This is a critical fastener and often requires a torque multiplier. Refer to the OEM manual for the specific procedure. |
| Valve Cover Bolts | 18-22 / 24-30 | Tighten in the sequence specified in the service manual to avoid warping the cover. |
| Intake Manifold Bolts | 35-45 / 47-61 | Follow the specified torque sequence to ensure a proper seal. |
Wheel lug torque pattern
For heavy-duty trucks like the Peterbilt 579, a "star" or "cross" pattern is essential for ensuring the wheel is seated evenly against the hub. Start with one lug nut, then tighten the one directly across from it. Continue this pattern, moving around the wheel until all lug nuts are torqued to the preliminary specification. Once all are snug, repeat the pattern to bring them to the final torque value. This prevents wheel runout and potential vibrations.
Brake torque notes
Proper torque on brake components is a critical safety item. The caliper bracket bolts are large, high-strength fasteners that secure the caliper assembly to the axle. They require a significant amount of torque to prevent any shifting under braking forces. The caliper slide pins, on the other hand, require much less torque. These pins allow the caliper to move freely, and over-tightening them can cause the caliper to bind, leading to uneven pad wear and reduced braking efficiency. Always use a high-quality, calibrated torque wrench for these components.
Why torque matters
Torque is the rotational force applied to a fastener. Every bolt on your Peterbilt 579 is designed to be stretched a specific amount to create the proper clamping force. Under-tightening a fastener can allow it to loosen over time due to vibration and heat cycling, which can lead to component failure. Over-tightening can stretch a bolt beyond its designed limits, causing it to yield or break. This can be just as dangerous as an under-torqued bolt, especially on critical components like wheels, brakes, and suspension. Using a calibrated torque wrench and following the manufacturer's specifications is the only way to ensure the safety and reliability of your vehicle.
Disclaimer: The torque values provided here are for general reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle configuration before any work is performed.
Find a trusted shop on Repairius.
More specs for the 2021 Peterbilt 579
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2021 Peterbilt 579 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.