2021 Ram ProMaster Paint Codes

Quick reference

Where to find your paint code

For your 2021 Ram ProMaster, the paint code is typically located on a sticker inside the driver's side door jamb. Open the driver's door and look at the edge of the door or the door frame (B-pillar). The sticker will often contain a lot of vehicle information. Look for a section labeled "Paint" or "Color," and you'll find the two or three-character paint code there, often alongside the color name. If you have trouble finding it, consult your owner's manual.

Best touch-up paint sources

Finding the right touch-up paint is crucial for maintaining the appearance of your 2021 Ram ProMaster. Here are some reliable sources:

• Dupli-Color: A widely available brand offering touch-up pens, paint exact-match sprays, and brush bottles. They have a good selection of factory-matched colors for Ram ProMaster models.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint, ensuring a precise match to your vehicle's original factory finish. They offer paint pens, brush bottles, aerosol cans, and larger quantities for more extensive repairs.
• Tcoat Custom-Mix: For those seeking the most accurate match, Tcoat can custom-mix paint based on your specific paint code, even for complex pearl or metallic finishes.
• Ram Dealership: Your local Ram dealership parts department can also provide OEM (Original Equipment Manufacturer) touch-up paint. This is often the most accurate option, though sometimes at a higher price.

How to use touch-up paint

For best results, follow these steps when applying touch-up paint:

1. Clean the area: Thoroughly clean the chip or scratch with soap and water, then follow with a wax and grease remover. Ensure the area is completely dry.
2. Apply primer (if needed): For deep scratches that go down to the bare metal or plastic, apply a thin layer of primer. Allow it to dry completely according to the product's instructions.
3. Apply base coat: Shake the touch-up paint well. Apply thin, even coats, allowing each coat to dry for 10-20 minutes before applying the next. Build up the color gradually until it matches the surrounding paint. For metallic or pearl colors, ensure even application to avoid blotchiness.
4. Apply clear coat: Once the base coat is dry, apply one or two thin layers of clear coat to protect the paint and restore the gloss. Let it cure completely.
5. Polish (optional): After the clear coat has fully cured (usually 24-48 hours), you can lightly polish the area to blend the repair and achieve a seamless finish.

Color matching tips for pearls and tri-coats

Pearl and tri-coat paints, like the Patriot Blue Pearl or Deep Cherry Red Crystal Pearl offered on the 2021 Ram ProMaster, can be more challenging to match perfectly due to their multi-layered composition. These paints contain reflective particles that change appearance under different lighting conditions.

• Layering is key: When applying touch-up paint for pearl or tri-coat finishes, it's crucial to apply thin, even layers. The base color establishes the primary hue, followed by a mid-coat (pearl coat) that provides the iridescence, and finally, a clear coat for protection and gloss.
• Feathering: For larger repairs, feathering the edges of the touch-up paint into the surrounding factory paint can help minimize the appearance of a hard line and improve the blend.
• Test on a discrete area: If possible, test the touch-up paint on an inconspicuous area first to see how the color develops and matches. This is especially helpful with multi-stage paints.
• Professional help: For significant damage or if you're uncomfortable with the complexity of multi-stage paints, consider professional repair to ensure an undetectable match.

Find a trusted body shop on Repairius.