2016 Ram ProMaster Paint Color Codes & Touch-Up Guide

As a hard-working commercial van, your 2016 Ram ProMaster is bound to see its fair share of scratches, rock chips, and scuffs. Whether you are using your van for deliveries, contracting work, or as a custom camper build, keeping the paint in good condition helps prevent rust and maintains its resale value.

To properly repair these cosmetic blemishes, you need the exact factory paint code. In this guide, we will break down every factory color offered for the 2016 Ram ProMaster, show you exactly where to find your paint code, and give you professional tips on touch-up repair.

Quick reference

Below is a complete list of the most common factory paint colors offered for the 2016 Ram ProMaster. Ram (FCA) uses a three-character paint code system, typically starting with a "P" for the primary color.

Color Name	Paint Code	Type (Solid / Metallic / Pearl)
Bright White	PW7	Solid
Black	PX8	Solid
Flame Red	PR4	Solid
Broom Yellow	PLG	Solid
Earth Brown	PEU	Solid
Granite Crystal Metallic	PAU	Metallic
Silver Metallic (Billet Silver)	PS2	Metallic
True Blue Pearl	PBU	Pearl
Deep Cherry Red Crystal Pearl	PRP	Pearl
Sandstone Pearl	PT6	Pearl

Note: If you are uncertain about your specific color, especially if your van was ordered as part of a custom fleet, always confirm your paint code via your VIN at a local Ram dealer or with your preferred paint supplier.

Where to find your paint code

Locating the paint code on your 2016 Ram ProMaster is a straightforward process. Ram, as part of Fiat Chrysler Automobiles (FCA), standardizes the location of its paint codes.

1. Check the Driver’s Side Door Jamb: Open the driver's door and look at the B-pillar or the door edge. You are looking for the Vehicle Certification Label (a black and white or yellow and white sticker).
2. Find the "PNT" Code: Near the bottom or middle of this sticker, look for the letters PNT: (which stands for Paint).
3. Read the 3-Digit Code: The three characters immediately following or below "PNT" represent your van's factory paint code (e.g., PNT: PW7).

If the sticker is missing, faded, or damaged, you can simply call your local Ram dealership's parts department, give them your 17-digit Vehicle Identification Number (VIN), and they will provide the exact paint code for your van.

Best touch-up paint sources

Once you have your three-digit paint code, you have several excellent options for sourcing a matching touch-up paint:

• AutomotiveTouchup: One of the most popular sources for exact-match custom paints. They offer everything from small half-ounce bottles with applicator brushes to aerosol spray cans and pints for larger spray gun jobs.
• Dupli-Color: A highly accessible brand found in almost every major auto parts store. Their Scratch Fix All-in-1 tools are great for minor rock chips on commercial vehicles.
• Tcoat Custom-Mix: A great online alternative that provides precise, custom-mixed paint kits based on your exact FCA factory code.
• Ram Dealerships: Mopar OEM touch-up paint pens and small bottles are available directly from the dealer. This guarantees a factory match, though the application tools can sometimes be basic.

How to use touch-up paint

For a durable, rust-preventing repair, follow these essential steps when applying touch-up paint:

1. Clean: Thoroughly wash the chipped or scratched area with grease and wax remover or rubbing alcohol. The surface must be completely free of dirt, road grime, and old wax.
2. Primer: If the scratch goes all the way down to bare metal or plastic, apply a light coat of automotive primer. Let it dry completely (usually 20-30 minutes) before proceeding.
3. Base Coat: Apply the color-matched base coat in thin, light layers. Use a fine-tipped brush or a toothpick for tiny chips. Wait 10-15 minutes between each coat until the primer is fully covered.
4. Clear Coat: The clear coat protects the color and gives it a factory shine. Once the base coat is fully dry to the touch (wait at least 30 minutes), apply the clear coat over the repair.

Color matching tips for pearls and tri-coats

If your ProMaster is painted in a metallic or pearl finish (like True Blue Pearl or Deep Cherry Red Crystal Pearl), keep these tips in mind:

• Always use test cards: Before applying paint to your van, test the color match on a piece of glossy cardboard or a metal test card.
• Agitate the paint: Metallic flakes and pearl micas settle quickly at the bottom of the bottle or can. Shake the paint vigorously before and during the application process to ensure an even distribution of the metallic flakes.
• Mind your angles: Metallic paint looks different depending on how the light hits it. Apply aerosol coats evenly and avoid holding the nozzle too close to the panel to prevent the flakes from pooling or tiger-striping.

Find a trusted body shop on Repairius.