2022 Ram ProMaster Serpentine Belt Guide
Working on this 2022 Ram ProMaster? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
2022 Ram ProMaster factory oil capacity
| Engine | Capacity | Oil | Filter |
|---|---|---|---|
| 3.6L | 6 qt (5.6 L) | SAE 0W-20 (first grade listed; see chart) | — |
Source: Mopar StarParts vehicle fluid specifications (FCA US LLC / Stellantis). Values as printed. Oil capacity finder →
Quick Answer
- Engine Option: 3.6L V6 Pentastar
- Belt Length: 2200mm (86.6 inches)
- Rib Count: 6-rib
- OEM Belt Part Number: Mopar 5184334AC
- Aftermarket Cross-References:
- Gates: K060866
- Dayco: 5060865
- Continental: 4060866
- Auto-Tensioner Part Number: Mopar 04893707AB
- Idler Pulley Part Number: Mopar 04861660AA (smooth idler)
Belt Routing
The 3.6L V6 Pentastar engine in the 2022 Ram ProMaster uses a single serpentine belt to drive all engine accessories. Before you remove the old belt, it is crucial to photograph the existing belt path from a few different angles. This will serve as a visual guide and prevent incorrect installation.
The belt follows this path:
- Starts at the crankshaft pulley at the bottom of the engine.
- Wraps up and around the A/C compressor pulley.
- Goes down and around the smooth idler pulley.
- Travels up to the alternator pulley.
- Comes down to the power steering pump pulley.
- Goes around the water pump pulley.
- Finishes by wrapping around the automatic tensioner, which maintains correct belt tension.
How to Replace the Serpentine Belt
Replacing the serpentine belt on the ProMaster's 3.6L V6 is straightforward with the right tool. You will need a serpentine belt tool or a long-handled 3/8" breaker bar to release the tension.
- Locate the Tensioner: The automatic tensioner is typically located near the alternator towards the top of the engine assembly. It has a 3/8" square hole in its body.
- Release Tension: Insert the 3/8" drive end of your breaker bar or serpentine belt tool into the square hole on the tensioner arm.
- Rotate the Tensioner: Rotate the tensioner arm to release the tension on the belt. This will allow you to slip the belt off one of the accessory pulleys (the highest, most accessible one like the alternator is usually easiest).
- Remove Old Belt: Carefully unthread the old belt from all the pulleys.
- Install New Belt: Following your photograph or the path described above, route the new belt around all the pulleys, leaving a smooth, accessible pulley for last (like the idler or water pump).
- Apply Tension: Release the tensioner again and carefully slip the belt onto the final pulley. Double-check that the belt is correctly seated in the grooves of every ribbed pulley and centered on the smooth pulleys.
- Final Check: Slowly release the tensioner arm to apply tension to the new belt. Start the engine and let it run for 15–30 seconds to ensure the belt is tracking correctly and not making any unusual noises.
Replacement Interval
For the 2022 Ram ProMaster, it is recommended to inspect the serpentine belt at every oil change. The typical replacement interval is between 60,000 and 90,000 miles, depending on operating conditions. Vehicles operated in harsh climates or that see heavy commercial use should have their belts replaced closer to the 60,000-mile mark. However, always replace the belt immediately if it shows signs of wear.
Signs of a Failing Belt or Tensioner
A worn belt or a failing tensioner can cause significant engine issues. Be aware of these warning signs:
- Squealing or Chirping Noises: This is the most common sign of a worn, glazed, or misaligned belt, especially noticeable on startup or when the A/C is turned on.
- Visible Wear: Inspect the belt for cracks, fraying, glazing (shiny spots), or missing ribs. Any visible damage warrants immediate replacement.
- Accessory Malfunctions: Since the belt powers the alternator, power steering, and water pump, a failing belt can lead to a dead battery, difficulty steering, or engine overheating.
- Tensioner Noise: A grinding or rattling noise coming from the tensioner area indicates that the tensioner pulley bearing is failing.
- "Bouncing" Tensioner Arm: If you see the tensioner arm vibrating or bouncing erratically while the engine is running, the internal spring mechanism is weak and the tensioner assembly needs to be replaced.
Find a trusted shop on Repairius to handle your serpentine belt replacement with confidence.
Need service on your Ram ProMaster?
Your vehicle and question are already filled in — just add your location.
More specs for the 2022 Ram ProMaster
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2022 Ram ProMaster Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-08-18.