2022 Ram ProMaster Oil Capacity, Filter, & Specs
Everything you need to know for a successful oil change on your 2022 Ram ProMaster.
Working on this 2022 Ram ProMaster? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
2022 Ram ProMaster factory oil capacity
| Engine | Capacity | Oil | Filter |
|---|---|---|---|
| 3.6L | 6 qt (5.6 L) | SAE 0W-20 (first grade listed; see chart) | — |
Source: Mopar StarParts vehicle fluid specifications (FCA US LLC / Stellantis). Values as printed. Oil capacity finder →
The 2022 Ram ProMaster equipped with the 3.6L Pentastar V6 engine takes exactly 6.0 quarts (5.6 liters) of 0W-20 engine oil when replacing the oil and filter. As an ASE-certified master technician, I regularly service these workhorses, and getting the exact oil specification and filter right is critical to keeping your van out of the shop and on the road making money.
Quick Answer
- Oil Capacity: 6.0 quarts (5.6 liters) with filter change.
- Recommended Oil Weight: SAE 0W-20.
- Oil Specification: API SP / ILSAC GF-6A, Chrysler Material Standard MS-6395.
- OEM Oil Filter: Mopar MO-349 (Part # 68191349AC or 68191349AA).
- Popular Aftermarket Filters:
- Fram: CH11665
- Wix: WL10010
- Mobil 1: M1C-251A
Capacity by Engine Option
For the 2022 model year, Ram streamlined the ProMaster powertrain offerings. The venerable 3.6L Pentastar V6 is the sole engine option available for the 1500, 2500, and 3500 chassis.
| Engine | Oil Capacity (with filter) | Recommended Viscosity |
|---|---|---|
| 3.6L Pentastar V6 | 6.0 Quarts (5.6 L) | 0W-20 |
Oil Change Interval
The 2022 Ram ProMaster features an automatic Oil Life Monitor system that alerts you when a change is due based on driving conditions. However, you should never exceed the maximum intervals.
- Normal Duty: Up to 10,000 miles, 12 months, or 350 hours of engine run time (whichever comes first). This applies to light highway driving with minimal heavy towing.
- Severe Duty: 4,000 miles or 6 months. You fall into this category if your ProMaster is used for frequent short trips, heavy towing, extensive idling (like delivery routes), or operating in dusty environments. Given that most ProMasters are commercial vehicles, I highly recommend following the severe duty schedule.
Drain Plug Torque
- Drain Plug Torque: 20 ft-lbs (27 Nm).
- Note: The standard oil pan drain plug features an integrated rubber sealing gasket. Inspect this rubber seal during every oil change. If it is flattened, cracked, or missing, replace the entire drain plug. Do not over-tighten, as the aluminum oil pan threads can strip easily.
- Oil Filter Cap Torque: 18 ft-lbs (25 Nm).
How to Change the Oil
- Prepare the Vehicle: Park on a level surface, engage the parking brake, and allow the engine to cool slightly so the oil is warm but not dangerously hot.
- Remove the Filter: Open the hood and locate the oil filter housing on top of the engine. Use a 24mm socket to unscrew the plastic cap. Remove the old cartridge filter and the O-ring from the cap.
- Install New Filter: Snap the new cartridge filter into the cap. Lubricate the new O-ring with fresh engine oil and install it in the correct groove on the cap. Thread the cap back into the housing and torque to 18 ft-lbs (25 Nm).
- Drain the Oil: Move underneath the vehicle. Locate the oil pan drain plug, place a catch pan underneath, and remove the plug with a 13mm wrench or socket. Allow the oil to drain completely.
- Reinstall Drain Plug: Inspect the plug's seal, then reinstall and torque to 20 ft-lbs (27 Nm).
- Refill: Pour exactly 6.0 quarts of 0W-20 oil into the engine oil filler neck.
- Verify and Reset: Start the engine and check for leaks. Turn it off, wait five minutes, and check the dipstick to ensure the level is correct. Finally, reset the Oil Life indicator on the dashboard.
Common Issues / Tips
If you own a ProMaster with the 3.6L Pentastar V6, you must be aware of the infamous oil filter housing/oil cooler assembly issue. This housing is made of plastic and sits deep in the "V" of the engine block.
- The Over-tightening Trap: The most common cause of massive oil leaks on these engines is over-tightening the oil filter cap. If you use a wrench to crank down the cap instead of a torque wrench (or stopping when it bottoms out gently), the plastic housing underneath will crack. This causes oil to pool in the engine valley and pour down the back of the transmission, mimicking a rear main seal leak.
- Always Lube the O-Ring: If you install the oil filter cap O-ring dry, it will bunch up, bind, and potentially crack the housing as you tighten it. Always smear fresh oil on it.
- Check the Valley: Before doing an oil change, shine a flashlight down past the oil filter housing into the engine valley. If you see oil pooling, your oil cooler assembly has likely failed and will need replacement.
Need an oil change? Find a trusted shop on Repairius.
Need service on your Ram ProMaster?
Your vehicle and question are already filled in — just add your location.
More specs for the 2022 Ram ProMaster
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2022 Ram ProMaster Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-06.