Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Wheel Alignment Specifications

    2020 Subaru Crosstrek Wheel Alignment Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2020 Subaru Crosstrek? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    AngleFront PrefFront RangeRear PrefRear Range
    Camber-0°30'-1°15' to 0°15'-1°00'-1°45' to -0°15'
    Caster8°00'7°15' to 8°45'N/AN/A
    Total Toe0°00'-0°08' to 0°08'0°00'-0°16' to 0°16'
    Individual Toe0°00'-0°04' to 0°04'0°00'-0°08' to 0°08'
    SAI13°30'12°45' to 14°15'N/AN/A
    Thrust AngleN/AN/AN/A-0°15' to 0°15'

    Note: These values are typical OEM specifications and may vary slightly based on specific vehicle trim, optional equipment, or regional variations. Always consult the factory service manual for the most precise information for your vehicle.

    Adjustability

    The 2020 Subaru Crosstrek offers a good degree of factory adjustability for common alignment angles, but some crucial ones are fixed from the factory.

    Front Axle:

    • Front Total Toe / Individual Toe: This is fully adjustable from the factory. Adjustment is made by rotating the tie rod ends, which lengthen or shorten the tie rods, effectively changing the toe angle. This is typically the most common and frequently adjusted front alignment angle.
    • Front Camber: Factory camber on the 2020 Crosstrek is not adjustable directly without aftermarket components. The camber angle is determined by the fixed mounting points of the strut and control arm. If your front camber is out of specification, it often indicates worn or damaged suspension components (like a bent strut or control arm, or worn ball joints/bushings) or requires the installation of aftermarket camber correction bolts (cam bolts) which replace the factory lower strut mounting bolts. These cam bolts have an eccentric lobe that allows for a limited range of camber adjustment.
    • Front Caster: Similar to front camber, front caster on the 2020 Crosstrek is not factory adjustable. Caster is determined by the fixed position of the lower control arm and strut mount. If caster is out of specification, it usually points to damaged suspension components or requires aftermarket control arms or eccentric bushings to correct.
    • SAI (Steering Axis Inclination): SAI is a non-adjustable

    Need service on your Subaru Crosstrek?

    Request service from shops in your area.

    More specs for the 2020 Subaru Crosstrek

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email