2020 Subaru Crosstrek Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Subaru Crosstrek? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 89.9 ft-lb / 122 Nm | Always re-check after 50-100 miles |
| Oil Drain Plug | 30.8 ft-lb / 41.8 Nm | Use a new crush washer |
| Transmission Drain Plug (CVT) | 36.9 ft-lb / 50 Nm | |
| Brake Caliper Bracket Bolts (Front) | 59 ft-lb / 80 Nm | |
| Brake Caliper Bracket Bolts (Rear) | 48 ft-lb / 65 Nm | |
| Brake Caliper Slide Pins | 19.9 ft-lb / 27 Nm | Apply high-temp grease to pins |
| Axle Nut (Front) | 162 ft-lb / 220 Nm | Stake nut after torquing |
| Spark Plugs | 15.9 ft-lb / 21.6 Nm | Cold engine; refer to plug manufacturer guidelines |
| Valve Cover Bolts | 5.1 ft-lb / 7 Nm | Ensure even tightening to prevent leaks |
Wheel lug torque pattern
Subaru Crosstrek models typically use a star or cross-pattern tightening sequence for wheel lug nuts. This ensures even pressure across the wheel hub and prevents rotor warp or wheel runout. Always tighten in stages, gradually increasing torque until the final specification is reached.
Brake torque notes
When working on the braking system, precise torque is paramount for safety. For brake caliper bracket bolts, ensure threads are clean and free of rust before installation. Never lubricate these threads unless specifically instructed by the manufacturer. For caliper slide pins, use a high-temperature silicone-based grease to allow for proper movement and prevent seizing. Always replace any self-locking nuts or bolts with new ones during brake service.
Why torque matters
Applying the correct torque to fasteners is crucial for the safe and reliable operation of your 2020 Subaru Crosstrek. Under-torqued fasteners can vibrate loose, leading to catastrophic failure, such as a wheel detaching from the vehicle or a fluid leak. Over-torqued fasteners can stretch or strip threads, deform components, or even break the bolt, which can also lead to failure and costly repairs. Properly torquing components ensures that they are held together with the correct clamping force, distributing stress evenly and preventing premature wear. This is especially important for critical components like those in the braking system, suspension, and engine. Using a calibrated torque wrench is essential for achieving these specifications.
Disclaimer: Always verify all torque specifications with the official OEM Subaru service manual for your specific 2020 Crosstrek model before performing any work. This information is for reference only and should not be used as a substitute for professional service or manufacturer-issued repair manuals.
Find a trusted shop on Repairius.
More specs for the 2020 Subaru Crosstrek
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Subaru Crosstrek Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.