2024 Subaru Crosstrek Wiper Blade Sizes

Quick reference

Best aftermarket replacements

Choosing the right aftermarket wiper blade often comes down to budget and desired performance. Here are some of the most popular and highly-rated options that are compatible with the 2024 Subaru Crosstrek:

• Bosch ICON: (Premium) A top-tier beam-style blade known for its excellent all-weather performance and longevity.
• Rain-X Latitude: (Mid-range) A very popular water-repelling beam blade that applies a hydrophobic coating to your windshield.
• Trico Force: (Mid-range) A robust hybrid blade designed for high-wind and heavy precipitation conditions.
• Michelin Stealth: (Mid-range) A hybrid blade that combines the stability of a conventional frame with the clean look of a beam blade.
• PIAA Si-Tech: (Premium) A silicone blade that lasts longer than standard rubber and coats the windshield with a layer of silicone for quiet, streak-free operation.

Attachment style

The 2024 Subaru Crosstrek uses a J-hook attachment for both the front and rear wiper arms. This is the most common type of wiper arm, shaped like the letter "J" at the end. It is designed for easy, secure installation of compatible wiper blades.

How to install

Replacing the wiper blades on a Crosstrek is a straightforward process that doesn't require any special tools.

1. Lift the wiper arm: Gently pull the wiper arm away from the windshield until it locks in the upright position.
2. Press the release tab: Look for a small plastic tab on the underside of the connector where the wiper blade attaches to the J-hook. Press this tab to release the old blade.
3. Remove the old blade: Slide the old wiper blade down and off the J-hook.
4. Install the new blade: Slide the new wiper blade's connector onto the J-hook until you hear a distinct "click." This sound confirms the blade is securely locked in place.
5. Lower the arm: Carefully lower the wiper arm back onto the windshield. Repeat the process for the other side and the rear.

Note: Always make sure the new wiper blade comes with the correct adapter for a J-hook attachment. Most aftermarket blades include a multi-adapter pack.

When to replace

For optimal visibility and safety, wiper blades should be replaced every 6 to 12 months. However, you should replace them immediately if you notice any of the following signs of wear:

• Streaking: Blades leave lines or streaks of water on the windshield.
• Chattering: The blade skips or vibrates across the glass instead of gliding smoothly.
• Splitting: The rubber element is cracked, split, or separating from the blade frame.
• Smearing: The blade spreads dirt and debris around instead of clearing it.

Need wipers swapped fast? Find a shop on Repairius.