2020 Tesla Model X Paint Codes

Quick reference

Where to find your paint code

The paint code for your 2020 Tesla Model X is typically located on a sticker on the driver's side door jamb. Open the driver's door and look for a label on the B-pillar (the vertical support between the front and rear doors) or on the edge of the door itself. The label should contain various vehicle information, and the paint code will usually be listed under a section for 'Paint' or 'Color'. It's often a short alphanumeric code, like those listed in the table above.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2020 Tesla Model X, several reputable sources offer quality paint that matches factory specifications:

• Dupli-Color: A widely available brand that offers touch-up paint in various forms, including paint pens, brush bottles, and aerosol cans. You can often find Dupli-Color products at automotive parts stores.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint for a vast array of vehicles. They match your vehicle's factory color using your paint code and offer a comprehensive range of products, including primers, basecoats, and clear coats, for a professional-looking repair.
• Tcoat Custom-Mix: For those seeking precision, Tcoat offers custom-mixed solutions that are blended to exact specifications, making them ideal for complex colors like multi-coats.
• Tesla Service Center: For the most accurate match and if you prefer OEM products, your local Tesla service center can provide genuine touch-up paint for your Model X.

How to use touch-up paint

Achieving a good result with touch-up paint requires a few careful steps:

1. Clean the area: Thoroughly wash and dry the area to be touched up, removing any dirt, wax, or grease. You can use an automotive prep solvent for best results.
2. Apply primer (if needed): For deeper scratches that expose bare metal or plastic, apply a thin layer of primer. Allow it to dry completely according to the product's instructions.
3. Apply base coat: Apply thin, even coats of your color-matched base coat. Allow each coat to dry before applying the next. Build up the color gradually until it matches the surrounding paint.
4. Apply clear coat: Once the base coat is fully dry, apply several thin layers of clear coat to protect the paint and provide a glossy finish. This step is crucial for durability and a seamless look.

Color matching tips for pearls and tri-coats

Tesla's Pearl White Multi-Coat and Red Multi-Coat are tri-coat paints, meaning they consist of three layers: a base color, a mid-coat (pearl effect), and a clear coat. This makes them more challenging to match perfectly with touch-up paint.

• Layering is key: For tri-coats, you'll need to apply the base color, then the pearl mid-coat, and finally the clear coat. The number of mid-coats applied will influence the pearl effect and overall color depth. It's often recommended to practice on a test surface first.
• Lighting conditions: Always assess your touch-up work in various lighting conditions (natural daylight, shade) to ensure the color match is consistent. The pearlescent effect can look different depending on the light.
• Blend carefully: When applying the pearl mid-coat, try to blend it outwards slightly from the repair area to minimize harsh lines. This helps the repair seamlessly integrate with the surrounding paint.
• Consider professional help: For larger or more prominent damage on multi-coat finishes, or if you're not confident in your ability to achieve a good match, it's often best to consult a professional body shop. They have the expertise and equipment to blend these complex colors effectively.

Find a trusted body shop on Repairius.