2019 Toyota Corolla Paint Color Codes & Touch-Up Guide
Find your factory color code and learn how to flawlessly touch up your 2019 Corolla.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Toyota Corolla? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2019 Toyota Corolla is one of the most reliable and popular compact cars on the road, but even the most careful drivers can end up with rock chips, door dings, and minor scratches. Whether you're planning a small DIY touch-up or preparing for a professional bumper respray, getting the exact factory paint code is the first and most crucial step.
Below is our comprehensive guide to 2019 Toyota Corolla paint codes, touch-up procedures, and color matching advice.
Quick reference
Here are the factory paint colors offered for the 2019 Toyota Corolla. Please note that availability may vary slightly depending on whether you have the sedan or the all-new-for-2019 Corolla Hatchback.
| Color Name | Paint Code | Type |
|---|---|---|
| Super White | 040 | Solid |
| Blizzard Pearl | 070 | Pearl (Tri-coat) |
| Classic Silver Metallic | 1F7 | Metallic |
| Magnetic Gray Metallic | 1G3 | Metallic |
| Black Sand Pearl | 209 | Pearl |
| Galactic Aqua Mica | 221 | Pearl / Mica |
| Barcelona Red Metallic | 3R3 | Metallic |
| Blue Crush Metallic | 8W7 | Metallic |
Note: If you are unsure of your exact color, always confirm via your VIN at a Toyota dealership or with your chosen paint supplier.
Where to find your paint code
Toyota makes it relatively easy to locate your vehicle's factory paint code. For the 2019 Corolla, you will find this information on the Vehicle Identification Number (VIN) certification label.
- Open the driver’s side door.
- Look at the lower section of the B-pillar (the door jamb area where the door latches when closed).
- Locate the black-and-white (or sometimes white-and-yellow) VIN sticker.
- Near the bottom left of this sticker, look for the letters C/TR (which stands for Color/Trim).
- The first three-digit alphanumeric code immediately following "C/" is your paint code (e.g., C/TR: 1G3/FA20 means your paint code is 1G3, Magnetic Gray Metallic).
Best touch-up paint sources
Getting a high-quality paint match is essential for a seamless repair. Here are the top sources for buying 2019 Corolla touch-up paint:
- AutomotiveTouchup: Highly recommended for their precision color mixing. They offer exact-match paint in convenient formats ranging from paint pens and 1/2 oz bottles to aerosol spray cans and ready-to-spray pints.
- Toyota Dealerships: The parts counter at your local Toyota dealer sells OEM touch-up paint pens and small brush bottles. This is a very reliable option for basic solid and metallic colors.
- Dupli-Color: A widely available aftermarket option found in most auto parts stores (like AutoZone or O'Reilly). Their Exact-Match line often carries popular Toyota colors like Super White (040) and Classic Silver (1F7).
- Tcoat Custom-Mix: Great for difficult-to-match colors or older paints that may have experienced slight fading, offering multi-stage kits.
How to use touch-up paint
For minor chips and scratches, following the correct process will yield the best results:
- Clean: Wash the area thoroughly with soap and water. Follow up with a wax and grease remover or rubbing alcohol to ensure no contaminants prevent the paint from adhering.
- Primer: If the scratch goes down to the bare metal or plastic, apply a thin layer of automotive primer. Let it dry completely before proceeding.
- Base Coat: Shake your paint pen or bottle vigorously. Apply the base color in light, thin layers. Do not glob the paint on; it’s better to apply two or three thin coats, allowing 15–20 minutes of drying time between each.
- Clear Coat: Once the base coat is completely dry (usually after a few hours), apply a clear coat. The clear coat protects the color and provides the glossy finish that matches the rest of your vehicle.
Color matching tips for pearls and tri-coats
Colors like Blizzard Pearl (070) require special attention. "Pearl" and "Mica" finishes are often tri-coat paints, meaning the factory applied a solid base color, a translucent pearl mid-coat to add the sparkle, and finally a clear coat.
- Buy a Tri-Coat Kit: When purchasing touch-up paint for Blizzard Pearl, make sure you buy a kit that includes both the ground coat (base) and the mid-coat (pearl). Applying just a white base will look flat and mismatched.
- Test First: Always test your mid-coat on a piece of scrap metal or cardboard. The more layers of the pearl mid-coat you apply, the darker and more yellow/creamy the finish will become. Match the number of coats to your car's specific hue.
- Blend Carefully: Metallic paints like Magnetic Gray (1G3) have metal flakes that need to lay flat to reflect light properly. Aerosol sprays generally blend metallics better than brush-on bottles, which can sometimes push the metallic flakes into uneven pools.
If your paint damage is beyond a simple DIY fix, don't risk a messy driveway repair. Find a trusted body shop on Repairius.
More specs for the 2019 Toyota Corolla
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Toyota Corolla Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.