2019 Toyota Corolla Oil Capacity & Filter Reference

The 2019 Toyota Corolla typically takes 4.4 quarts (4.2 liters) of 0W-20 synthetic motor oil.

Quick Answer

• Oil Capacity: 4.4 quarts (4.2 liters)
• Recommended Oil Weight: 0W-20 Synthetic Motor Oil
• Oil Specification: ILSAC GF-5 or higher (such as ILSAC GF-6A) / API SN or higher (such as API SP)
• Oil Filter (OEM): Toyota PN 90915-YZZF2
• Oil Filter (Aftermarket Cross-Reference):
  • Fram: PH4967
  • Wix: 57062
  • Mobil 1: M1-103A

Capacity by Engine Option

For the 2019 model year, the Toyota Corolla offered primarily two engine options in North America, with identical oil capacities.

Oil Change Interval

Toyota recommends adherence to specific oil change intervals to maintain engine longevity and performance.

• Normal Duty: Every 10,000 miles or 12 months, whichever comes first. This applies to vehicles operated under typical driving conditions with regular highway and city driving.
• Severe Duty: Every 5,000 miles or 6 months, whichever comes first. This interval is recommended for vehicles frequently exposed to conditions such as:
  • Repeated short trips (less than 5 miles in mild temperatures, or less than 10 miles in freezing temperatures)
  • Towing or heavy loading
  • Driving in dusty conditions
  • Extensive idling or low-speed driving for long distances

Always consult your owner's manual for the most accurate and personalized maintenance schedule based on your specific driving habits and conditions.

Drain Plug Torque

When performing an oil change on your 2019 Toyota Corolla, it is crucial to tighten the drain plug to the correct specification to prevent leaks or damage.

• Drain Plug Torque: 30 ft-lbs (41 Nm)

It is also highly recommended to replace the drain plug crush washer (gasket) with a new one each time you change the oil. This ensures a proper seal and prevents leaks.

How to Change the Oil (Brief Steps)

Performing an oil change yourself can be a straightforward process. Here's a simplified guide:

1. Warm up the engine: Drive the vehicle for a few minutes to bring the oil to operating temperature, making it flow more easily.
2. Park and secure: Park on a level surface, engage the parking brake, and safely lift the front of the vehicle using a jack and jack stands.
3. Locate drain plug: Place a suitable drain pan under the oil pan. Use a 14mm wrench or socket to loosen and remove the drain plug.
4. Drain oil: Allow all the old oil to completely drain into the pan.
5. Replace drain plug: Install a new crush washer on the drain plug and tighten it to 30 ft-lbs (41 Nm).
6. Remove oil filter: Position the drain pan under the oil filter location. Use an oil filter wrench to loosen and remove the old oil filter. Be aware that additional oil will drain out.
7. Install new oil filter: Apply a thin film of new engine oil to the gasket of the new oil filter. Thread the new filter on by hand until snug, then tighten an additional 3/4 to 1 turn, or per filter manufacturer's instructions.
8. Add new oil: Remove the oil filler cap and carefully pour in approximately 4.2 quarts of the recommended 0W-20 synthetic motor oil.
9. Check oil level: Start the engine and let it run for a minute, then turn it off. Wait a few minutes for the oil to settle, then check the oil level with the dipstick. Add small amounts of oil if necessary until the level is within the proper range.
10. Inspect for leaks: Double-check the drain plug and oil filter areas for any signs of leaks.
11. Dispose of old oil: Properly dispose of the used oil and filter at an authorized recycling center.

Common Issues / Tips (11th Generation Corolla: E170 Chassis 2014-2019)

• Oil Consumption (minor): While not widespread, some 1.8L engines in this generation might exhibit minor oil consumption between changes. Regularly check your oil level, especially if you drive often or have a higher-mileage vehicle.
• Crush Washer Importance: As mentioned, always use a new crush washer to prevent leaks from the drain plug. This is a common oversight that can lead to frustrating drips.
• Accessibility: The oil filter and drain plug are relatively accessible on the 2019 Corolla, making DIY oil changes manageable for most.
• Synthetic Oil Requirement: The 1.8L engines are designed for 0W-20 synthetic oil. Using conventional oil or an incorrect weight can impact fuel economy and engine wear over time.
• Tire Pressure Monitoring System (TPMS) Reset: While unrelated to the oil change itself, it's a good habit to check and adjust tire pressure during basic maintenance. If you notice a TPMS light after any service, ensure your tires are correctly inflated.

Need an oil change? Find a trusted shop on Repairius.