2022 Toyota Highlander Paint Color Codes

Quick reference

Where to find your paint code

The paint code for your 2022 Toyota Highlander is typically located on the driver's side door jamb. Open the driver's door and look for a sticker or label on the B-pillar (the vertical post between the front and rear doors) or on the edge of the door itself. The paint code is usually a three-digit alphanumeric code. Check the manufacturer's label for a section titled "COLOR" or "PAINT." It might be next to information like "C/TR" which stands for Color/Trim. If you cannot locate it there, check your owner's manual for diagrams showing sticker locations, or speak with a Toyota parts department representative, providing your VIN.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2022 Toyota Highlander, several reputable sources offer quality products:

• Dupli-Color: A widely available option at most automotive parts stores. Dupli-Color offers exact-match colors in various forms, including paint pens, brush bottles, and aerosols. They are a good option for small chips and scratches.
• AutomotiveTouchup: This online retailer specializes in custom-mixed touch-up paint, guaranteeing a precise match to your vehicle's factory color. They offer a comprehensive range of products, including primers, basecoats, and clear coats, in pens, bottles, and aerosol cans.
• Tcoat custom-mix: Tcoat is another excellent online resource for precisely matched automotive touch-up paint. They provide high-quality paint formulated to perfectly match your Highlander's original color, available in various application methods, and are well-regarded for their color accuracy.
• Dealer: Your local Toyota dealership can provide genuine OEM touch-up paint specifically designed for your Highlander. While often a bit more expensive, it ensures an exact factory match and can be a good option for critical repairs.

How to use touch-up paint

Proper application of touch-up paint is crucial for a seamless repair:

1. Clean: Thoroughly clean the affected area with soap and water, then degrease it with a wax and grease remover. This ensures proper adhesion.
2. Primer (if needed): For deeper scratches or exposed metal, apply a thin layer of automotive primer. Allow it to dry completely according to the product instructions.
3. Base Coat: Apply the color-matched base coat in thin, even layers. Build up the color gradually, allowing each layer to dry before applying the next. If your vehicle has a metallic or pearl finish, shake the paint regularly during application to ensure even pigment distribution.
4. Clear Coat: Once the base coat is dry, apply several thin layers of clear coat to protect the paint and restore the factory gloss. This is essential for durability and matching the surrounding finish.

Color matching tips for pearls and tri-coats

Pearl and tri-coat paints, like Blizzard Pearl (070) and Wind Chill Pearl (089), are complex finishes with multiple layers that create their unique depth and shimmer. Achieving a perfect match with these colors can be challenging for DIY repairs. It often involves a base color layer, a mid-coat pearl layer, and a final clear coat. When attempting to touch up these colors, it is especially important to apply very thin, even coats and build up the color gradually. If you are not confident in your ability to match the pearl effect, consulting a professional body shop is highly recommended to ensure a uniform and aesthetically pleasing repair.

Find a trusted body shop on Repairius.