2015 Toyota Tundra Paint Codes

Quick reference

Where to find your paint code

For your 2015 Toyota Tundra, the paint code is typically located on the driver's side door jamb. Open the driver's door and look for a sticker, usually white or silver, attached to the door jamb or the B-pillar (the post between the front and rear doors). On this sticker, you'll find a variety of information about your vehicle, including the VIN, tire pressure recommendations, and the paint code. The paint code is usually a three-digit alphanumeric code, often preceded by "C/TR" or simply "COLOR." For example, "C/TR 040" would indicate Super White.

If you have trouble locating it, refer to your owner's manual for exact instructions and diagrams, or you can contact a Toyota dealership with your VIN, and they will be able to provide you with the correct paint code.

Best touch-up paint sources

• Dupli-Color: A widely available option at most auto parts stores. Dupli-Color offers products like paint pens, touch-up bottles with brushes, and spray cans. They are great for small chips and scratches and generally offer a good color match for common Toyota colors.
• AutomotiveTouchup: This online retailer specializes in custom-mixed touch-up paint. They use your specific paint code to create a precise match, offering paint pens, bottles, and aerosol cans. Their color matching is often superior, especially for metallic and pearl finishes.
• Tcoat custom-mix: Similar to AutomotiveTouchup, Tcoat offers custom-mixed paint solutions that are typically highly accurate. They are an excellent option for those seeking the best possible match for more complex finishes.
• Dealership: Your local Toyota dealership can also supply OEM (Original Equipment Manufacturer) touch-up paint. While sometimes a bit more expensive, this ensures you are getting the exact factory formulation for your Tundra.

How to use touch-up paint

1. Clean: Thoroughly clean the area around the chip or scratch with soap and water, then dry it completely. You can use rubbing alcohol to remove any remaining wax or grease.
2. Primer (if needed): For deeper scratches that go through to the bare metal or plastic, apply a thin layer of primer. Allow it to dry completely according to the product instructions.
3. Base Coat: Apply thin, even coats of your paint color. For paint pens, a light dabbing motion is often best. For bottles, use the brush sparingly to fill the chip. Allow each coat to dry before applying the next. Build up the color slowly until it matches the surrounding paint.
4. Clear Coat: Once the base coat is dry, apply a clear coat. This protects the paint and provides a glossy finish, helping it blend with the factory paint. Again, apply in thin layers and allow to dry between coats.

Color matching tips for pearls and tri-coats

Pearl and tri-coat paints, like Blazing Blue Pearl (8T0) found on some 2015 Tundras, are more complex than solid or metallic paints. They consist of multiple layers: a base color, a mid-coat containing the pearl or mica flakes, and a clear coat. Achieving a perfect match with touch-up paint can be challenging due to the way these layers interact with light.

• Layering is Key: When applying touch-up to pearl or tri-coat finishes, it's crucial to apply very thin, even layers. The pearl effect comes from the way light reflects off the mica particles in the mid-coat. Too much paint in one go can obscure this effect.
• Blend Carefully: Try to feather the edges of your touch-up paint so that it blends seamlessly with the surrounding factory paint. This is especially important for the mid-coat.
• Professional Help: For larger repairs or if you're aiming for an invisible repair on a pearl or tri-coat finish, consider professional body shop services. They have the tools and expertise to properly blend these complex finishes.

Never invent codes — if uncertain on a specific color, list only well-known popular colors and tell the reader to confirm via VIN at dealer or paint supplier.

Find a trusted body shop on Repairius.