2015 Toyota Tundra Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2015 Toyota Tundra? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 97 ft-lb / 131 Nm | Re-torque after 50-100 miles |
| Oil Drain Plug | 30 ft-lb / 41 Nm | Use a new gasket |
| Transmission Drain Plug | 15 ft-lb / 20 Nm | Check fluid level after filling |
| Front Brake Caliper Bracket Bolts | 137 ft-lb / 186 Nm | Use thread locker |
| Front Brake Caliper Slide Pins | 20-25 ft-lb / 27-34 Nm | Lubricate pins |
| Rear Brake Caliper Bracket Bolts | 70-80 ft-lb / 95-108 Nm | |
| Rear Brake Caliper Slide Pins | 20-25 ft-lb / 27-34 Nm | Lubricate pins |
| Axle Nut | 173 ft-lb / 235 Nm | Use a new cotter pin |
| Spark Plugs | 15 ft-lb / 20 Nm | |
| Valve Cover Bolts | 9 ft-lb / 12 Nm | |
| Intake Manifold Bolts | 15 ft-lb / 20 Nm | Tighten in sequence |
Wheel Lug Torque Pattern
When tightening the wheel lug nuts on your 2015 Toyota Tundra, it is crucial to follow a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing warping of the brake rotors and ensuring a safe connection. Start with one lug nut, then tighten the one directly across from it. Continue this pattern until all lug nuts are tightened to the specified torque. Never tighten lug nuts in a circular pattern.
Brake Torque Notes
Brake system fasteners are critical to your safety. The torque specifications for the brake caliper bracket bolts are significantly higher than those for the slide pins. This is because the bracket is a structural component that absorbs the braking force, while the slide pins allow the caliper to move freely. Always use a calibrated torque wrench for these components. It is also recommended to apply thread locker to the caliper bracket bolts to prevent them from loosening over time.
Why Torque Matters
Torque is the rotational equivalent of force, and every fastener on your vehicle has a specific torque value for a reason. Over-tightening a fastener can stretch the threads, damaging the bolt or the component it is threaded into. This can lead to component failure. Under-tightening a fastener can allow it to loosen over time due to vibration and heat cycling, which can have equally disastrous consequences. Using a torque wrench is the only way to ensure that fasteners are tightened to the manufacturer's specifications, ensuring the safety and reliability of your vehicle.
Disclaimer: The information on this page is for reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle.
Find a trusted shop on Repairius.
More specs for the 2015 Toyota Tundra
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2015 Toyota Tundra Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.