2022 Toyota Tundra Paint Color Codes & Touch-Up Guide

Whether you are covering up a minor rock chip from an off-road adventure or repairing a parking lot scratch, getting the exact paint match for your 2022 Toyota Tundra is critical. The all-new 2022 Tundra introduced a bold redesign, and along with it, a stunning palette of factory colors, including TRD-specific shades like Solar Octane.

Below is your complete guide to 2022 Toyota Tundra paint codes, where to find them, and how to successfully apply touch-up paint.

Quick reference

Here are the factory colors offered for the 2022 Toyota Tundra. Always verify your specific code before ordering paint.

Color Name	Paint Code	Type (Solid / Metallic / Pearl)
Super White / Ice Cap	040	Solid
Wind Chill Pearl	089	Pearl
Magnetic Gray Metallic	1G3	Metallic
Celestial Silver Metallic	1J9	Metallic
Midnight Black Metallic	218	Metallic
Supersonic Red	3U5	Pearl
Solar Octane	4W5	Metallic / Pearl
Smoked Mesquite	4X4	Metallic
Army Green	6V7	Solid
Lunar Rock	6X3	Solid
Blueprint	8X8	Metallic

Note: If you are uncertain about your specific color, confirm your paint code via your VIN at a local Toyota dealer or trusted paint supplier.

Where to find your paint code

Finding the exact paint code on your 2022 Toyota Tundra is a straightforward process. Toyota typically places the vehicle's manufacturing sticker (also known as the Service Parts Identification or Compliance label) in a highly visible area.

1. Driver’s Side Door Jamb (B-Pillar): Open the driver's side door and look at the frame (the B-pillar) or the edge of the door itself. You will see a black and white sticker containing a barcode, VIN, and weight specifications.
2. Locating the Code: Look near the bottom left of this sticker. You will see the letters "C/TR:" followed by a sequence of characters. The "C" stands for Color, and the three-digit alphanumeric code immediately following it is your paint code (e.g., C/TR: 1G3/FB10 means your exterior paint code is 1G3).

Best touch-up paint sources

Getting a perfect match requires buying high-quality paint. Here are the most reliable sources for your 2022 Tundra:

• AutomotiveTouchup: Highly recommended for exact OEM-matched paint in pens, brush bottles, and aerosol cans. They mix the paint custom to your specific Toyota code.
• Toyota Dealership Parts Department: Your local dealer sells official OEM paint pens (usually featuring both a pen tip and a brush) specifically formulated by Toyota. This is great for small chips.
• Dupli-Color: A highly accessible aftermarket option available at most auto parts stores like AutoZone or O'Reilly Auto Parts. Look for their Toyota-specific "Scratch Fix All-in-1" tools.
• Tcoat Custom-Mix: A premium option for professional-grade touch-up kits that include blending solutions and clear coats for seamless repairs.

How to use touch-up paint

For a professional-looking repair, patience and proper preparation are key. Follow these steps for the best results:

1. Clean: Thoroughly wash the scratched area with soap and water. Follow up by wiping the area with wax and grease remover or rubbing alcohol to remove any oils that could prevent paint adhesion.
2. Primer: If the scratch goes down to the bare metal or plastic, apply a thin layer of primer. Let it dry completely (usually 20-30 minutes) before proceeding.
3. Base Coat: Apply the color base coat in very light, thin layers. Do not try to fill the scratch in one go, as this will cause blobs. Allow 15-20 minutes of drying time between each coat until the color covers the scratch completely.
4. Clear Coat: Once the final base coat is dry (wait at least an hour), apply the clear coat. This protects the paint and provides a glossy finish to match the rest of your truck.

Color matching tips for pearls and tri-coats

Colors like Wind Chill Pearl (089) and Supersonic Red (3U5) are tri-coat paints. This means the factory finish consists of a base color, a translucent pearl mid-coat, and a protective clear coat.

When touching up tri-coats, you must apply the base color first, followed by the pearl coat. Practice on a piece of cardboard or scrap metal first to see how many layers of the pearl mid-coat it takes to achieve the same visual depth and tint as your truck. Too many pearl layers will make the spot look darker than the surrounding paint, while too few will look flat. Metallic colors like Magnetic Gray Metallic (1G3) require you to shake the bottle or can vigorously to ensure the metallic flakes are evenly suspended before application.

If your scratch is too large for a touch-up pen or you are not comfortable tackling a tri-coat repair yourself, don't risk a botched DIY job.

Find a trusted body shop on Repairius.