2023 Toyota Tundra — Wiper Blade Sizes & Fitment

Quick reference

Note: The 2023 Toyota Tundra (pickup) is not equipped with a rear wiper from the factory. Always verify fitment against your specific trim and windshield; do not substitute different lengths side-to-side.

Best aftermarket replacements

These popular beam-style blades fit the 2023 Tundra’s J‑hook arms and offer excellent wipe quality and winter performance. Price ranges are approximate per blade.

• Bosch ICON: 24A (driver) + 20A (passenger). Premium ~$28–$35
• Rain‑X Latitude (including Water Repellency 2‑in‑1): 24" + 20". Mid/Premium ~$20–$30
• Trico Force (or Trico Titan/Maxx in some stores): 24" + 20". Mid/Premium ~$20–$30
• Michelin Stealth Ultra/Elite: 24" + 20". Mid ~$18–$28
• PIAA Si‑Tech silicone: 24" + 20". Premium ~$28–$40

Tip: Many brands sell mixed-size two‑packs for trucks with a longer driver blade and shorter passenger blade—look for 24"/20" kits labeled for Toyota Tundra (2022–2024).

Attachment style

Most 2023 Toyota Tundra trims use the common J‑hook wiper arm (9x3 mm). Beam blades listed above include a plug‑and‑play J‑hook adapter in the box. If your replacement blade includes multiple adapters, choose the J‑hook insert; no tools are usually required.

Unusual attachments: If your truck has aftermarket arms or specialty winter blades, you may encounter side‑pin or push‑button (top‑lock) fittings. In that case, use the correct adapter from the blade kit or select a version specifically packaged for that arm type.

How to install

1. Park safely and switch off the ignition. If your Tundra has a service/maintenance wiper position, set it now so the arms raise off the cowl.
2. Lift the driver-side arm. Press the release tab on the existing blade where it meets the J‑hook. Slide the blade down toward the arm’s bend to unhook, then off the arm.
3. Prep the new blade with the J‑hook adapter installed. Turn the blade so the hook can slide over the mounting rail.
4. Pull the arm’s hook up through the blade’s opening until it “clicks” and locks. Tug gently to confirm it’s secure.
5. Repeat for the passenger side with the 20" blade.
6. Lower the arms carefully onto the glass. Test the wipers and washer to confirm smooth, quiet operation.

Notes:

• If your blade uses a push‑button/top‑lock adapter, press the side button to release/install instead of sliding off the hook.
• Avoid letting the bare arm snap against the windshield—use a fender cover or towel for protection while swapping.

When to replace

Plan on replacing wiper blades every 6–12 months depending on climate and use. Replace sooner if you notice:

• Streaking, smearing, or missed areas
• Chattering, judder, or squeaking
• Cracked, torn, or hardened rubber edges
• Reduced performance in rain at highway speeds

Fresh, correctly sized beam blades (24" driver, 20" passenger) restore visibility and reduce eye strain in bad weather.

Need wipers swapped fast? Find a shop on Repairius.