2016 Ford Escape Oil Capacity & Filter Reference
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2016 Ford Escape? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2016 Ford Escape requires between 4.3 and 5.7 quarts of oil, depending on the engine. Always verify your engine size before purchasing oil and a filter.
Quick Answer
- Oil Capacity:
- 2.5L i-VCT: 4.5 quarts / 4.3 liters (with filter)
- 1.6L EcoBoost: 4.3 quarts / 4.1 liters (with filter)
- 2.0L EcoBoost: 5.7 quarts / 5.4 liters (with filter)
- Recommended Oil Weight: 5W-20 (2.5L) or 5W-30 (1.6L, 2.0L EcoBoost)
- Oil Specification: Ford WSS-M2C945-A (2.5L) or WSS-M2C946-A (EcoBoost). A full synthetic or synthetic blend API SN PLUS or SP motor oil is recommended.
- Oil Filter (OEM): Ford FL-910S
- Oil Filter Cross-Reference: Fram PH3614, Mobil 1 M1-102A, WIX 51348
Capacity by Engine Option
| Engine | Oil Capacity (with filter) | Recommended Viscosity | Oil Specification |
|---|---|---|---|
| 2.5L i-VCT I-4 | 4.5 qts / 4.3 L | 5W-20 | Ford WSS-M2C945-A |
| 1.6L EcoBoost I-4 | 4.3 qts / 4.1 L | 5W-30 | Ford WSS-M2C946-A |
| 2.0L EcoBoost I-4 | 5.7 qts / 5.4 L | 5W-30 | Ford WSS-M2C946-A |
Oil Change Interval
Ford's Intelligent Oil-Life Monitor (IOLM) system will display a message in the instrument cluster when it is time to change the oil. However, a good rule of thumb is:
- Normal Duty: 7,500-10,000 miles or once a year, whichever comes first.
- Severe Duty: 3,000-5,000 miles. Severe duty includes frequent short trips, extensive idling, towing, or driving in extremely hot or cold conditions.
Drain Plug Torque
- Drain Plug Torque: 21 lb-ft (28 Nm)
- Crush Washer: It is highly recommended to replace the drain plug gasket (crush washer) with each oil change to prevent leaks. Consult your local dealer for the exact part number.
How to Change the Oil (Simplified)
- Warm up the engine for 2-3 minutes to circulate the oil.
- Safely raise and support the vehicle using jack stands.
- Place a drain pan under the oil pan and remove the 15mm drain plug.
- While the oil drains, locate and remove the oil filter (it may be tight).
- Once draining slows to a drip, clean the drain plug area and reinstall the plug with a new gasket, torquing it to 21 lb-ft.
- Lightly lubricate the new oil filter gasket with fresh oil and spin it on until it makes contact, then tighten it an additional 3/4 to one full turn.
- Lower the vehicle and add the correct amount of fresh oil through the fill cap on the engine.
- Start the engine, let it run for 30 seconds to circulate the new oil, then shut it off. Wait a few minutes and check the dipstick, adding more oil if necessary to reach the full mark.
- Reset the Oil-Life Monitor system through the vehicle's information display.
Common Issues / Tips
- EcoBoost Engines: The 1.6L and 2.0L EcoBoost engines use a turbocharger, which is lubricated by engine oil. Using high-quality full synthetic oil meeting the Ford WSS-M2C946-A spec is critical for the turbo's longevity. Cheaper oils can break down under the high heat generated by the turbo.
- Filter Location: The oil filter on all engines is located on the front of the engine block, making it relatively easy to access from underneath the vehicle.
- Oil Consumption: Some owners have reported minor oil consumption between changes, especially on the EcoBoost models. It is wise to check your oil level on the dipstick every few hundred miles.
Need an oil change? Find a trusted shop on Repairius.
More specs for the 2016 Ford Escape
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2016 Ford Escape Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.