Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2020 Ford Escape Oil Capacity & Filter

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2020 Ford Escape? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2020 Ford Escape Oil Capacity & Filter

    The 2020 Ford Escape requires 5.7 quarts (5.4 liters) of 5W-30 synthetic blend motor oil for the 1.5L EcoBoost engine and 5.7 quarts (5.4 liters) of 5W-30 synthetic blend motor oil for the 2.0L EcoBoost engine.

    Quick Answer

    • Oil Capacity: 5.7 quarts (5.4 liters) for both 1.5L EcoBoost and 2.0L EcoBoost engines
    • Recommended Oil Weight: 5W-30
    • Oil Spec: API SN PLUS or later, or ILSAC GF-5 or later (Ford recommends Motorcraft SYNTHETIC BLEND MOTOR OIL XO-5W30-QSP or equivalent)
    • **Oil Filter (1.5L & 2.0L EcoBoost):
      • OEM Ford:** FL-910S
      • Fram: PH10575
      • Wix: 57502
      • Mobil 1: M1-102A

    Capacity by Engine Option

    EngineOil Capacity (Quarts/Liters)Recommended Oil TypeOil Spec
    1.5L EcoBoost5.7 quarts (5.4 liters)5W-30 Synthetic BlendAPI SN PLUS / ILSAC GF-5 or later
    2.0L EcoBoost5.7 quarts (5.4 liters)5W-30 Synthetic BlendAPI SN PLUS / ILSAC GF-5 or later

    Oil Change Interval

    Ford recommends the following oil change intervals for the 2020 Escape:

    • Normal Duty: Every 7,500 to 10,000 miles or 6 to 12 months, whichever comes first.
    • Severe Duty: Every 5,000 miles or 6 months, whichever comes first. Severe duty conditions include frequent short trips, extensive idling, towing, or operating in extreme temperatures.

    Drain Plug Torque

    For both the 1.5L and 2.0L EcoBoost engines in the 2020 Ford Escape, the drain plug torque specification is 19 lb-ft (25 Nm). Always use a new crush washer to ensure a proper seal and prevent leaks. The original crush washer is typically a metal ring with a rubberized coating.

    How to Change the Oil

    1. Warm up the engine: Drive the vehicle for a few minutes to bring the oil to operating temperature, ensuring it drains more easily.
    2. Lift and secure: Park on a level surface, engage the parking brake, and raise the front of the vehicle using a jack and secure it with jack stands.
    3. Locate drain plug: Place a suitable drain pan beneath the oil pan drain plug. Remove the drain plug with a wrench.
    4. Drain oil: Allow all the old oil to drain completely. This can take several minutes.
    5. Replace drain plug: Once drained, reinstall the drain plug with a new crush washer and torque to 19 lb-ft (25 Nm).
    6. Remove old filter: Locate the oil filter. Place a small drain pan beneath it to catch any residual oil, then unscrew the old filter.
    7. Install new filter: Apply a thin film of new oil to the gasket of the new oil filter. Screw on the new filter hand-tight until the gasket makes contact, then tighten an additional 3/4 to 1 full turn.
    8. Add new oil: Lower the vehicle. Remove the oil cap and carefully pour in the recommended amount of new motor oil.
    9. Check level: Start the engine and let it run for a few minutes. Shut it off, wait a few minutes for the oil to settle, then check the oil level with the dipstick. Add more oil if necessary.
    10. Inspect for leaks: Check around the drain plug and oil filter for any signs of leaks.
    11. Reset oil life monitor: Consult your owner's manual for instructions on how to reset the oil life monitoring system.

    Common Issues / Tips

    • Plastic Drain Plug: Some 2020 Ford Escape models, particularly those with the 1.5L EcoBoost engine, may feature a plastic drain plug. These plugs often have an O-ring for sealing. While convenient, some owners prefer replacing the plastic plug with an aftermarket metal one for added durability. If using the plastic plug, ensure the O-ring is in good condition or replaced with the plug (many aftermarket plastic plugs come with a new O-ring).
    • Oil Filter Placement: While generally accessible, the oil filter on the 2020 Escape can be a bit messy to remove due to its orientation. Having plenty of rags and a wide drain pan is advisable.
    • Synthetic Blend vs. Full Synthetic: While Ford specifies a synthetic blend, using a full synthetic oil that meets the required specifications can offer enhanced protection and potentially extend oil change intervals (always adhere to severe duty intervals if applicable, regardless of oil type). The 5W-30 viscosity is crucial for optimal engine lubrication and fuel economy.
    • Monitoring Oil Levels: Even with a properly sealed system, it's good practice to periodically check your oil level between oil changes to ensure it remains within the recommended range, especially on EcoBoost engines.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Ford Escape?

    Request service from shops in your area.

    More specs for the 2020 Ford Escape

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email