2017 Ford Escape Battery: Specs, Replacement & Реlearn

Quick Answer

• BCI Group Size: H6 (also known as Group 48)
• CCA Rating: 760 CCA (minimum recommended)
• Reserve Capacity: 120 minutes (minimum recommended)
• AGM vs. Flooded: AGM is strongly recommended for optimal performance and longevity, though flooded may be found in some base models.
• Terminal Layout: Top post, typically DIN (flush) terminals.
• Physical Dimensions (H6/48): Approximately 10.9" (L) x 6.9" (W) x 6.9" (H)
• Dual-Battery Setup: Not applicable (gasoline vehicle).

Replacement Battery Options

• Interstate: MT5-H6
• DieHard: Platinum AGM H6
• Optima: DH6 YellowTop (designed for accessory loads, but suitable for starting)
• Odyssey: ODP-AGM48 H6

AGM vs. Flooded — Which Does This Vehicle Need?

The 2017 Ford Escape, particularly models equipped with the start-stop technology, is designed to utilize an Absorbent Glass Mat (AGM) battery. While some base models may have come with a traditional flooded lead-acid battery, upgrading to an AGM battery is highly recommended, even if your vehicle doesn't have start-stop.

AGM batteries offer several advantages for modern vehicles like the Escape:

• Improved Cycling Capability: They can withstand repeated deep discharges and recharges better than flooded batteries, crucial for start-stop systems that frequently shut off and restart the engine.
• Higher Power Output: AGM batteries generally provide more consistent power delivery, which benefits the numerous electronic systems in newer cars.
• Vibration Resistance: The glass mat construction makes them more resistant to vibration, extending their lifespan.
• Leak-Proof Design: AGM batteries are sealed and maintenance-free, eliminating the risk of acid leaks.

While a flooded battery might be a cheaper upfront option, it will likely have a shorter lifespan and may not perform optimally, especially in cold weather or if your Escape has start-stop. Investing in a quality AGM battery will save you money and headaches in the long run.

Post-Installation Relearn / Reset Procedure

After replacing the battery in your 2017 Ford Escape, it's crucial to perform a Battery Monitoring System (BMS) reset. This procedure tells the vehicle's computer that a new battery has been installed, allowing it to properly monitor and charge the new battery. Failing to do so can lead to premature battery failure, inaccurate charge readings, and issues with vehicle accessories.

There are two common methods for performing a BMS reset:

1. Dealer or Shop Scan Tool: The most reliable method is to have a Ford dealership or an independent shop with a compatible scan tool perform the reset. They will connect to the vehicle's OBD-II port and initiate the BMS reset function.

2. Manual Reset (for some models): While not officially recommended by Ford for all models, some owners have reported success with a manual reset procedure. This typically involves:

   • Connecting the new battery terminals securely.
   • Turning on the ignition without starting the engine (ACC mode).
   • Pressing the brake pedal three times within a few seconds.
   • Turning on the headlights, waiting a few seconds, turning them off.
   • Repeating the headlights on/off step if necessary.
   • Starting the engine and letting it idle for a few minutes.

   Important Note: The manual reset procedure's effectiveness varies by model year and trim. Always refer to your owner's manual for the most accurate information. If you're unsure, or if the manual method doesn't work, it