2024 Ford Explorer Oil Capacity & Filter Guide

The 2024 Ford Explorer takes 5.7 quarts (5.4 liters) of 5W-30 synthetic blend motor oil for the 2.3L EcoBoost engine, and 6.2 quarts (5.9 liters) of 5W-30 synthetic blend motor oil for the 3.0L EcoBoost engine. Both engines require oil meeting Ford specification WSS-M2C946-B1.

Quick Answer

2.3L EcoBoost Engine:

• Oil Capacity: 5.7 quarts (5.4 liters)
• Recommended Oil Weight: 5W-30
• Oil Spec: Ford WSS-M2C946-B1 (Synthetic Blend)
• OEM Oil Filter: FL-910S
• Aftermarket Oil Filter Cross-References:
  • Fram: PH2
  • Wix: 57502
  • Mobil 1: M1-102A

3.0L EcoBoost Engine (including ST and Platinum):

• Oil Capacity: 6.2 quarts (5.9 liters)
• Recommended Oil Weight: 5W-30
• Oil Spec: Ford WSS-M2C946-B1 (Synthetic Blend)
• OEM Oil Filter: FL-910S
• Aftermarket Oil Filter Cross-References:
  • Fram: PH2
  • Wix: 57502
  • Mobil 1: M1-102A

Capacity by Engine Option

Oil Change Interval

Ford recommends an oil change interval of 7,500 to 10,000 miles or every 6-12 months, whichever comes first, for normal driving conditions. However, if your driving habits fall under severe duty, you should consider more frequent oil changes, typically every 5,000 miles or 6 months.

Severe duty conditions include:

• Frequent short trips (less than 10 miles)
• Towing or heavy loading
• Idling for extended periods
• Driving in extremely cold or hot temperatures
• Frequent driving in dusty or sandy conditions

Always refer to your 2024 Ford Explorer's owner's manual for the most accurate and up-to-date maintenance schedule.

Drain Plug Torque

For both the 2.3L and 3.0L EcoBoost engines in the 2024 Ford Explorer, the oil drain plug torque specification is 19 lb-ft (25 Nm). It is highly recommended to replace the drain plug crush washer (or gasket) with a new one every time you perform an oil change to ensure a proper seal and prevent leaks. Consult your dealer for the specific Ford crush washer part number.

How to Change the Oil

1. Warm up the engine: Drive the vehicle for a few minutes to bring the oil to operating temperature, allowing it to drain more easily.
2. Lift and secure: Park on a level surface, engage the parking brake, and safely lift the front of the vehicle using a jack and jack stands.
3. Locate drain plug: Find the oil pan and position a suitable drain pan underneath.
4. Drain oil: Carefully remove the drain plug with the correct wrench and allow all the old oil to drain completely.
5. Replace drain plug: Once drained, reinstall the drain plug with a new crush washer and tighten to the specified torque.
6. Replace oil filter: Locate the oil filter, unscrew it, and allow any remaining oil to drain. Apply a thin coat of new oil to the gasket of the new filter before screwing it on hand-tight, then an additional 3/4 turn (or as per filter manufacturer instructions).
7. Refill with new oil: Lower the vehicle and carefully add the recommended amount and type of new motor oil through the oil fill cap.
8. Check oil level: Start the engine and let it run for a few minutes. Shut it off, wait a few minutes for the oil to settle, then check the dipstick and top off if necessary.
9. Reset oil life monitor: Follow the instructions in your owner's manual to reset the oil life monitoring system.
10. Inspect for leaks: Check thoroughly for any leaks around the drain plug and oil filter.

Common Issues / Tips for the 2024 Ford Explorer (6th Generation)

• Synthetic Blend Importance: Adhering to the Ford WSS-M2C946-B1 specification, which typically calls for a synthetic blend, is crucial for the longevity of your EcoBoost engine. These engines run hotter and operate under higher pressures, benefiting greatly from the enhanced protection of specified oils.
• Oil Filter Location: The oil filter for both engines is generally accessible from underneath the vehicle, making DIY changes manageable.
• Check for Leaks Regularly: Especially with EcoBoost engines, it's a good practice to regularly inspect for any signs of oil leaks around the engine and turbocharger components.
• Tire Rotations: While not directly oil-related, it's often convenient to perform a tire rotation at the same time as an oil change, as the vehicle will already be lifted.
• Fluid Checks: Use this opportunity to check other fluid levels, such as coolant, brake fluid, and power steering fluid (if applicable).

Need an oil change? Find a trusted shop on Repairius.