Working on your 2014 Ford F-350 Super Duty requires precision, especially when tightening fasteners. Using a calibrated torque wrench is essential for ensuring the safety, reliability, and longevity of your truck. This guide provides the key torque specifications for the most common maintenance and repair jobs.

Quick Reference Torque Specifications

This table summarizes the critical torque values for your 2014 F-350. Note that values can vary based on specific sub-models (e.g., Single vs. Dual Rear Wheel, 4x2 vs. 4x4). Always consult the official Ford service manual for the most precise figures for your exact vehicle configuration.

Fastener	Torque (ft-lb / Nm)	Notes
Wheel Lug Nuts (SRW)	165 ft-lb / 224 Nm	For single rear wheel models.
Oil Drain Plug (6.2L Gas)	18 ft-lb / 24 Nm	Always use a new gasket.
Oil Drain Plug (6.7L Diesel)	21 ft-lb / 28 Nm	Always use a new gasket.
Transmission Pan Bolts	10 ft-lb / 14 Nm	Tighten in a crisscross pattern.
Front Brake Caliper Bracket	203 ft-lb / 275 Nm	Apply blue threadlocker.
Rear Brake Caliper Bracket	184 ft-lb / 250 Nm	Apply blue threadlocker.
Brake Caliper Slide Pins	55 ft-lb / 75 Nm	Lubricate pins with silicone-based brake grease.
Front Axle Nut (4WD)	See Notes	This is a multi-step process, often requiring a specific sequence of torquing, backing off, and re-torquing. A common value is 250 ft-lb / 339 Nm but verify with OEM manual based on hub type.
Spark Plugs (6.2L Gas)	11 ft-lb / 15 Nm	Use caution, do not overtighten in aluminum heads.
Glow Plugs (6.7L Diesel)	14 ft-lb / 20 Nm	Apply anti-seize to threads.
Valve Cover Bolts	7-9 ft-lb / 10-12 Nm	Sequence is critical. Tighten in several passes from the center outwards.
Intake Manifold Bolts (6.2L)	6-8 ft-lb / 8-11 Nm	This is a multi-stage process. Tighten bolts to 62 lb-in (7 Nm) in sequence, then to 89 lb-in (10 Nm) in the same sequence.

Wheel Lug Torque Pattern

For the F-350's 8-lug wheels, always tighten the lug nuts in a star or cross pattern. This ensures the wheel is centered and applies clamping force evenly against the hub. Never tighten lug nuts in a circular pattern.

Tighten the first lug nut.
Move directly across to the opposite lug nut and tighten it.
Move to the nut at a "2 o'clock" position.
Move directly across to its opposite nut.
Continue this pattern until all eight nuts are tightened.

Start by snugging the nuts down in sequence, then set your torque wrench and make a final pass in the same sequence to achieve the final torque value.

Brake Torque Notes

Properly torquing brake components is a critical safety measure. Always clean the threads of the caliper bracket bolts and the steering knuckle before reassembly. A medium-strength (blue) threadlocker is recommended on caliper bracket bolts to prevent them from vibrating loose.

Caliper slide pins must be clean and lubricated with a high-temperature, silicone-based brake grease to allow the caliper to move freely. Do not allow grease or oil to contaminate the brake pads or rotors.

Why Torque Matters

Torque is a measurement of rotational force. Applying the correct torque to a nut or bolt stretches it slightly, creating a precise amount of clamping force. This clamping force is what holds parts together.

Under-tightening can cause fasteners to vibrate loose, leading to component failure, dangerous wobbles, or fluid leaks.
Over-tightening can stretch a fastener beyond its designed limit, permanently weakening it and making it likely to break. It can also strip threads in softer materials like aluminum engine blocks or transmission cases, leading to costly and complex repairs.

Using a torque wrench eliminates guesswork and ensures every critical fastener is tightened exactly as the manufacturer intended.

Disclaimer: The torque specifications listed above are for general reference. Always verify critical fastener torque values by consulting the official OEM service manual for your specific vehicle year, model, and configuration. Repairius is not liable for any damage or injury resulting from the use of this information.

Find a trusted shop on Repairius.

Don't overhaul your shop. Test Repairius on your next job.

Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

14-day free trial · credit card required · cancel anytime

Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

2014 Ford F-350 Super Duty Torque Specifications

Quick Reference Torque Specifications

Wheel Lug Torque Pattern

Brake Torque Notes

Why Torque Matters

Need service on your Ford F-350 Super Duty?

More specs for the 2014 Ford F-350 Super Duty

Same spec — other model years

Maintenance & repair guides

Browse by make

Compare Repairius to the shop software you're paying for

Don't overhaul your shop. Test Repairius on your next job.

Know someone who needs this?