2024 Ford F-350 Super Duty Paint Codes

Quick reference

Where to find your paint code

For most 2024 Ford F-350 Super Duty trucks, your paint code can be found on the door jamb sticker (also known as the B-pillar sticker or certification label). This sticker is typically located on the driver's side door jamb, either on the door itself or on the pillar it latches to. Look for a label that contains information about your vehicle's manufacturing details. The paint code is usually listed under the section titled "EXT PNT" or "EXTERIOR PAINT CODE." It will be a two-character alphanumeric code, sometimes followed by a two-digit revision number.

If you have trouble locating it, refer to your owner's manual for the exact location or contact a Ford dealership with your VIN to have them look it up for you. Knowing your exact paint code is crucial for getting the best color match.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2024 Ford F-350 Super Duty, several reputable sources offer quality products:

• Dupli-Color: A widely available brand that you can find at most auto parts stores. They offer a good range of factory-matched colors in pens, bottles, and aerosol cans.
• AutomotiveTouchup (paintscratch.com): This online retailer specializes in custom-mixed, factory-match automotive paint. They offer a comprehensive selection of colors for virtually every make and model, including specific formulations for metallic, pearl, and tri-coat finishes. Their products are often praised for their accuracy and quality.
• Tcoat custom-mix: Tcoat is another excellent online option for custom-mixed paint. They provide a high level of color matching precision and often have options for various paint types.
• Ford Dealership: Your local Ford dealership can also provide genuine OEM touch-up paint specifically designed for your F-350 Super Duty. While sometimes a bit more expensive, it guarantees a factory-level match.

How to use touch-up paint

Achieving a good touch-up repair requires a bit of patience and the right technique. Here's a general guide:

1. Clean the area: Before applying any paint, thoroughly clean the damaged area with soap and water, then follow up with rubbing alcohol or a wax and grease remover. This ensures proper adhesion.
2. Apply primer (if needed): For deeper scratches or areas where bare metal is exposed, apply a thin coat of automotive primer. Allow it to dry completely according to the product instructions.
3. Apply base coat: Using a fine brush or applicator, apply thin coats of your chosen touch-up paint directly to the scratch or chip. Build up the color in thin layers, allowing each coat to dry for 10-15 minutes before applying the next. Avoid over-applying, as this can create an uneven surface.
4. Apply clear coat: Once the base coat is dry, apply a clear coat to protect the paint and restore its gloss. Again, apply in thin layers, allowing adequate drying time between coats.
5. Polish (optional): For best results, after the clear coat has fully cured (this can take 24-48 hours), you can gently polish the area with a fine rubbing compound to blend the repair with the surrounding paint.

Color matching tips for pearls and tri-coats

Pearl and tri-coat paints, like the Rapid Red Metallic Tinted Clearcoat and Star White Metallic Tri-Coat offered on the 2024 Ford F-350 Super Duty, have a more complex finish than solid colors. They achieve their depth and shift in color through multiple layers, often including a colored ground coat, a pearl mid-coat, and a clear coat.

• Expect variations: Due to the multi-layer nature, achieving a perfect match with touch-up paint can be more challenging. Lighting conditions, application technique, and even the angle at which you view the paint can affect how the color appears.
• Purchase from specialists: For these complex finishes, it's highly recommended to purchase touch-up paint from specialists like AutomotiveTouchup or Tcoat. They often provide multi-stage kits that include all the necessary layers for a more accurate repair.
• Practice on a test surface: If possible, practice your application technique on a hidden area or a scrap piece of metal to get a feel for how the paint lays down and dries before applying it to your truck.
• Blend carefully: When applying, try to blend the edges of your repair as seamlessly as possible with the surrounding paint to minimize the appearance of the touch-up.

Find a trusted body shop on Repairius.