2019 Ford Ranger Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Ford Ranger? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel lug nuts | 100 ft-lb / 135 Nm | |
| Oil drain plug | 19 ft-lb / 26 Nm | |
| Transmission drain plug | 35 ft-lb / 47 Nm | |
| Brake caliper bracket bolts | 111 ft-lb / 150 Nm | |
| Brake caliper slide pins | 26 ft-lb / 35 Nm | |
| Axle nut | 221 ft-lb / 300 Nm | |
| Spark plugs | 11 ft-lb / 15 Nm | |
| Valve cover bolts | 9 ft-lb / 12 Nm | |
| Intake manifold bolts | 18 ft-lb / 24 Nm |
Wheel lug torque pattern
When tightening the wheel lug nuts, it is crucial to follow a star or cross pattern to ensure even clamping force. This helps to prevent warping the brake rotor and ensures the wheel is properly seated against the hub. Start with one lug nut, then tighten the one directly across from it. Continue this pattern until all lug nuts are snug. Then, in the same pattern, torque the lug nuts to their final specification.
Brake torque notes
Proper torque on brake components is critical for safety and performance. The brake caliper bracket bolts are a high-torque fastener and should be clean and dry before installation. The brake caliper slide pins, on the other hand, require a much lower torque. Over-tightening the slide pins can cause them to bind, leading to uneven pad wear and reduced braking efficiency. Always use a calibrated torque wrench for these critical fasteners.
Why torque matters
Torque is the rotational equivalent of force, and every fastener on your vehicle has a specific torque value for a reason. Over-tightening a fastener can cause it to stretch and deform, potentially leading to failure. Under-tightening can allow a component to loosen over time, which can have disastrous consequences, especially with critical components like wheels and brakes. Using a torque wrench is the only way to ensure that each fastener is tightened to the manufacturer's specification.
Disclaimer: The torque specifications provided in this article are for general reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle. Repairius is not responsible for any damage or injury resulting from the use of this information.
Find a trusted shop on Repairius.
More specs for the 2019 Ford Ranger
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Ford Ranger Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.