2019 GMC Sierra 1500 Battery Size & Specifications
Everything you need to know about replacing the battery in your 2019 GMC Sierra 1500, including group sizes, AGM requirements, and reset procedures.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 GMC Sierra 1500? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Answer: 2019 GMC Sierra 1500 Battery Specifications
If you are replacing the battery in your 2019 GMC Sierra 1500, here are the core specifications you need to know. Note that the exact size depends heavily on your engine configuration (V6, V8, or the 3.0L Duramax diesel) and whether your truck is equipped with the Auto Start/Stop feature.
- BCI Group Size: Group H6 (48) or Group H7 (94R). The H7 is typically used in V8 and diesel models, or those with heavy electrical loads.
- Cold Cranking Amps (CCA): 730 CCA (minimum for H6) up to 850 CCA (typical for H7). Diesel models require higher CCA.
- Reserve Capacity: 115 to 140 minutes, depending on the group size and battery grade.
- AGM vs Flooded Requirement: Absorbed Glass Mat (AGM) is strictly required for all 2019 Sierra 1500s equipped with Auto Start/Stop technology.
- Terminal Layout: Standard top post (Positive on the right).
- Physical Dimensions (H7/94R): 12.4" L x 6.9" W x 7.5" H.
- Physical Dimensions (H6/48): 10.9" L x 6.9" W x 7.5" H.
- Dual-Battery Setup: The 3.0L Duramax diesel may feature a primary and auxiliary battery setup, depending on the accessory package and payload configuration.
Replacement Battery Options
Upgrading to a high-quality battery ensures your truck’s complex electronics and starter are protected. Here are some of the most reliable, ASE-recommended replacements for the 2019 GMC Sierra 1500:
- ACDelco Gold AGM (OEM Replacement): Part # 48AGM (for H6) or 94RAGM (for H7). This is the direct factory-equivalent replacement.
- DieHard Platinum AGM: Available in Group H6 or H7. Excellent warranty and built specifically to handle Auto Start/Stop cycling.
- Interstate MTX Series AGM: Part # MTX-48 H6 or MTX-94R H7. Known for rugged durability in extreme climates.
- Optima YellowTop: Part # DH6 or DH7. A premium deep-cycle and starting battery perfect for trucks running aftermarket winches, lighting, or audio systems.
- Odyssey Performance Series: Part # ODP-AGM48 H6 or ODP-AGM94R H7. Features massive deep-cycling capabilities and high CCA.
AGM vs Flooded — Which Does This Vehicle Need?
For the 2019 GMC Sierra 1500, an AGM (Absorbent Glass Mat) battery is highly recommended and, in most cases, required. This generation of the Sierra utilizes Auto Start/Stop technology to improve fuel economy. Every time the engine shuts off at a red light, the battery is forced to run the infotainment system, climate control fans, headlights, and other modules—and then it must restart the engine a moment later.
A standard flooded lead-acid battery cannot withstand this aggressive cycling and will fail prematurely. AGM batteries recharge faster, handle deep discharges better, and are designed specifically for these high electrical loads. If your truck came with an AGM battery from the factory, you must replace it with an AGM battery.
Post-Installation Relearn / Reset Procedure
Like most modern trucks, the 2019 GMC Sierra 1500 uses a Battery Management System (BMS). The BMS monitors battery age, temperature, and state of charge to optimize alternator output.
When you install a new battery, the BMS must be reset so it doesn't overcharge the new unit (which it does to compensate for an old, degraded battery).
- Using a Scan Tool: The preferred method is connecting a high-level OBD2 diagnostic scanner to perform a "Battery Monitor System Reset."
- Without a Scan Tool (Self-Learning): If you don't have a scanner, the truck can often relearn the battery state on its own. After installation, lock the truck and let it sit undisturbed for at least 8 hours (overnight is best) without the key fob nearby. The computer will read the resting voltage and recalibrate the system.
Signs of a Failing Battery
Modern trucks are highly sensitive to voltage drops. Watch out for these symptoms indicating your Sierra's battery is on its way out:
- Auto Start/Stop Disabled: The computer will automatically disable the Start/Stop system if it detects a weak battery.
- Slow Engine Crank: The starter sounds sluggish, especially on cold mornings.
- Random Electrical Gremlins: The infotainment screen flickering, power windows moving slowly, or random warning lights (like StabiliTrak or Trailer Brake warnings) illuminating on the dash.
- Corrosion on Terminals: Excessive blue/white powder on the positive terminal can indicate off-gassing from a failing battery.
Common Battery Issues for This Generation
The 2019 redesign brought a lot of new tech to the Sierra 1500. One of the most common complaints for this generation is premature battery failure—often occurring around the 3-year mark. This is heavily tied to the aggressive demands of the Auto Start/Stop system and the large array of continuous parasitic drains (like the OnStar module and keyless entry sensors). Upgrading to a premium, high-reserve-capacity AGM battery usually mitigates these early failure issues. Additionally, owners living in extremely hot climates (like Texas or Arizona) frequently see even shorter battery lifespans due to heat degradation.
Find a trusted shop on Repairius.
More specs for the 2019 GMC Sierra 1500
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 GMC Sierra 1500 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.