2019 GMC Sierra 1500 - Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 GMC Sierra 1500? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 140 ft-lb / 190 Nm | Always tighten in a star pattern |
| Oil Drain Plug | 18 ft-lb / 24 Nm | For 5.3L and 6.2L engines. Always use a new drain plug gasket. |
| Transmission Drain Plug | 20 ft-lb / 27 Nm | Verify for specific transmission model. |
| Brake Caliper Bracket Bolts | 129-148 ft-lb / 175-200 Nm | Front and rear may vary. Use threadlocker where specified. |
| Brake Caliper Slide Pins | 22-26 ft-lb / 30-35 Nm | Ensure proper lubrication for smooth operation. |
| Axle Nut (Front) | 177 ft-lb / 240 Nm | For 2WD and 4WD models. |
| Spark Plugs | 11 ft-lb / 15 Nm | For 5.3L and 6.2L engines. Ensure engine is cool. |
| Valve Cover Bolts | 89 in-lb / 10 Nm | Multiple bolts, tighten in sequence. |
Wheel lug torque pattern
For the 2019 GMC Sierra 1500, the wheel lug nuts should always be tightened in a star pattern. This ensures even seating of the wheel against the hub, preventing warping of the rotor and potential loosening of the lug nuts.
Brake torque notes
When working on the brakes of your 2019 GMC Sierra 1500, it's crucial to pay close attention to torque specifications. Brake caliper bracket bolts are high-stress fasteners and incorrect torque can lead to dangerous situations. Always consult the OEM service manual for the exact specifications for your specific brake system, as there can be variations between different trim levels and brake packages. For brake caliper slide pins, proper torque ensures the caliper can float freely, which is essential for even pad wear and optimal braking performance. Always clean and lubricate the slide pins thoroughly before reinstallation.
Why torque matters
Applying the correct torque to fasteners is more critical than many realize. Under-torquing a fastener can lead to it vibrating loose, potentially causing components to separate or fail, which can have catastrophic consequences, especially in critical areas like wheels or brakes. Over-torquing, on the other hand, can stretch or strip threads, damage the fastener itself, or even crack the component it's securing. This weakens the connection and can lead to premature failure. Using a calibrated torque wrench is essential for ensuring that every fastener is tightened to its manufacturer-specified value, promoting safety, longevity, and optimal performance of your vehicle.
Disclaimer: Always consult your official OEM service manual for the most accurate and up-to-date torque specifications for your specific vehicle. This information is provided for general guidance only and should not replace professional advice. Critical fasteners should always be verified with the OEM service manual.
Find a trusted shop on Repairius.
More specs for the 2019 GMC Sierra 1500
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 GMC Sierra 1500 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.