Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Factory Maintenance Schedule

    2020 GMC Sierra 1500 Maintenance Schedule

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2020 GMC Sierra 1500? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    MileageServiceNotes
    5,000Oil & Filter Change, Tire RotationFirst service. Essential for new engine break-in.
    10,000Oil & Filter Change, Tire Rotation
    15,000Oil & Filter Change, Tire Rotation
    22,500Replace cabin air filterRecommended to maintain air quality inside the truck.
    30,000Oil & Filter Change, Tire Rotation
    45,000Replace engine air filter, Replace cabin air filter. Inspect evaporative control system.Engine air filter replacement is key for performance and fuel economy.
    60,000Oil & Filter Change, Tire Rotation
    75,000Oil & Filter Change, Tire Rotation
    90,000Oil & Filter Change, Tire Rotation, Replace cabin air filter
    97,500Replace spark plugsPrevents misfires and maintains fuel economy.
    100,000Oil & Filter Change, Tire RotationMajor inspection point. See "Known Issues" below.
    120,000Oil & Filter Change, Tire Rotation
    150,000Replace accessory drive belts, Replace engine air filter, Flush and replace engine coolant, Service transmission, flush brake fluid, change transfer case fluid, change front and rear differential fluid.Major service interval. Addresses all critical fluids and wear items.

    Severe-duty schedule

    For Sierras used in severe conditions—towing, frequent short trips, dusty environments, or extreme cold—the maintenance schedule should be adjusted. Change the oil and filter every 3,000-5,000 miles, or as indicated by the oil life monitor. Tire rotations may be needed more frequently, especially when towing. Inspect brakes and suspension components more often.

    Known issues by mileage

    • 40,000-60,000 miles: Some owners report transmission shudder or hard shifting. A fluid flush and addition of a special friction modifier often resolves the issue.
    • 60,000-80,000 miles: Premature wear on brake rotors.
    • 80,000-120,000 miles: Lifter failure on the 5.3L and 6.2L V8 engines.
    • 100,000+ miles: Accessory belt tensioner and pulley failure.

    Estimated cost per service

    • 5,000-15,000 miles: $80-$150 (Oil change, tire rotation)
    • 22,500 miles: $150-$250 (Oil change, tire rotation, cabin air filter)
    • 45,000 miles: $250-$400 (Oil change, tire rotation, engine and cabin air filters)
    • 97,500 miles: $400-$600 (Spark plug replacement, plus standard service)
    • 150,000 miles: $1,200-$2,000+ (Major service including all fluids, belts, and filters)

    What you can DIY vs shop

    • DIY: Oil and filter changes, tire rotations (with a proper jack and stands), cabin and engine air filter replacements, and spark plug replacement are all manageable for the home mechanic.
    • Shop: Transmission, brake, differential, and coolant flushes are best left to a professional shop. These services require specialized equipment to perform correctly.

    Book service on Repairius.

    Need service on your GMC Sierra 1500?

    Request service from shops in your area.

    More specs for the 2020 GMC Sierra 1500

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email