2018 GMC Sierra 1500 Factory Maintenance Schedule
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2018 GMC Sierra 1500? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Your 2018 GMC Sierra 1500 is a robust truck designed for years of reliable service, provided it receives timely maintenance. Following the factory-recommended maintenance schedule is crucial for optimal performance, longevity, and retaining resale value. This guide outlines the key service intervals for your Sierra 1500, covering everything from basic oil changes to more involved fluid flushes and component inspections.
Quick reference
| Mileage | Service | Notes |
|---|---|---|
| 7,500 miles (or 12 months) | Oil & Filter Change | Use Dexos-approved synthetic blend or full synthetic oil; monitor Oil Life Monitor system (OLM) for exact interval |
| 7,500 miles (or 12 months) | Tire Rotation | Essential for even tire wear and extended tire life |
| 7,500 miles (or 12 months) | Multi-point Inspection | Check fluid levels, belts, hoses, brakes, steering, and suspension components |
| 15,000 miles (or 24 months) | Cabin Air Filter Replacement | More frequent replacement recommended in dusty conditions or if allergies are a concern |
| 22,500 miles (or 36 months) | Fuel Filter Replacement | Typical for vehicles with external fuel filters, consult owner's manual for specific instructions regarding in-tank filters |
| 22,500 miles (or 36 months) | Brake Fluid Flush | Ensures optimal braking performance and prevents moisture contamination |
| 45,000 miles (or 48 months) | Engine Air Filter Replacement | More frequent replacement in dusty environments |
| 45,000 miles (or 48 months) | Spark Plug Replacement | Especially important for maintaining engine efficiency and preventing misfires |
| 45,000 miles (or 48 months) | PCV Valve Inspection/Replacement | Check for proper operation; replace if clogged or faulty |
| 45,000 miles (or 48 months) | Inspect Accessory Drive Belt | Check for cracks, fraying, or wear |
| 97,500 miles (or 84 months) | Coolant Flush | Helps prevent corrosion and maintain proper engine temperature |
| 97,500 miles (or 84 months) | Transmission Fluid Service (Drain & Fill) | Consult owner's manual for specific recommendations based on usage |
| 97,500 miles (or 84 months) | Differential Fluid Service (Front & Rear) | Crucial for heavy-duty use or towing |
| 97,500 miles (or 84 months) | Transfer Case Fluid Service (4x4 models) | Essential for proper 4WD system operation |
| 150,000 miles | Inspect Timing Chain | The 2018 Sierra 1500 typically uses a timing chain, which is designed to last the life of the engine. Inspection is recommended at this mileage. |
Understanding Your Oil Life Monitor (OLM)
The 2018 GMC Sierra 1500 is equipped with an advanced Oil Life Monitor (OLM) system. This system doesn't just track mileage; it calculates your oil's life based on various factors, including engine revolutions, engine temperature, and driving habits. While a general interval of 7,500 miles or 12 months (whichever comes first) is often cited, the OLM will provide a more precise indicator. It's crucial to follow the OLM and change your oil when it reaches 0% or when the
More specs for the 2018 GMC Sierra 1500
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 GMC Sierra 1500 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.