2015 GMC Yukon Paint Codes: Your Guide to Matching Perfection

Finding the right paint code for your 2015 GMC Yukon is essential for any touch-up or repair job. This guide provides a comprehensive list of factory paint codes, explains where to locate your vehicle's specific code, and offers tips for achieving a seamless match.

Quick reference

Where to find your paint code

For your 2015 GMC Yukon, the paint code is typically located on a sticker in the glove box or on the Service Parts Identification (SPID) label, which is usually found on the inside of the glove box lid. Open the glove box and look for a white or silver sticker with various codes and information about your vehicle. The paint code will be a two- or three-digit number followed by a letter, or a four-digit code, often preceded by "BC/CC" (Basecoat/Clearcoat) or "EXT PNT" (Exterior Paint).

If you can't find the sticker in the glove box, check the driver's side door jamb (the area visible when the driver's door is open). There might be a label with your VIN and other vehicle information, which could also contain the paint code.

As a last resort, your GMC dealership parts department can provide your exact paint code using your Vehicle Identification Number (VIN).

Best touch-up paint sources

• Dupli-Color: A widely available brand offering aerosol cans and paint pens. They provide a good balance of affordability and color accuracy for many common colors.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paints in various forms (pens, bottles, aerosol cans) and is known for its precise color matching, especially for metallic and pearl finishes.
• Tcoat custom-mix: For unique or hard-to-match colors, Tcoat offers custom-mixed paints based on your paint code, ensuring a highly accurate match.
• Dealer: Your GMC dealership can supply OEM (Original Equipment Manufacturer) touch-up paint, which is guaranteed to be an exact match to your factory finish.

How to use touch-up paint

1. Clean: Thoroughly clean the area to be repaired with soap and water, then an automotive degreaser to remove any wax, grease, or contaminants.
2. Prime (if necessary): For deeper scratches or chips that expose bare metal or plastic, apply a thin layer of automotive primer. Allow it to dry completely.
3. Base Coat: Apply thin, even coats of your base color paint. Allow each coat to dry to the touch before applying the next. Build up the color gradually until it matches the surrounding paint.
4. Clear Coat: Once the base coat is dry, apply a few thin layers of clear coat to protect the paint and restore the factory gloss. This is crucial for durability and weather resistance.

Color matching tips for pearls and tri-coats

Metallic and pearl (or tri-coat) paints can be more challenging to match due to their multi-layered nature. Tri-coat paints, like Crimson Red Tintcoat or White Diamond Tricoat, typically consist of a base color, a translucent mid-coat (the pearl or tint), and a clear coat. For these finishes:

• Apply thin, even layers: This is even more critical for metallic and pearl paints to avoid blotchiness or color inconsistencies.
• Blend carefully: When applying the mid-coat of a tri-coat, blend it out slightly beyond the immediate repair area to feather the edges and create a seamless transition.
• Lighting is key: Always check your progress in good, natural lighting. Different light sources can make colors appear varied.
• Consider professional help: For larger repairs or if you're uncomfortable with the complexity of matching a tri-coat, a professional body shop will have the expertise and equipment for an invisible repair.

Find a trusted body shop on Repairius.