2016 GMC Yukon Key Fob Programming
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2016 GMC Yukon? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Item | Detail |
|---|---|
| FCC ID | OHT01060512 |
| OEM Fob PN | 13504199, 13589332 |
| Aftermarket Options | Look for compatibility with FCC ID OHT01060512 |
| Battery Type | CR2032 |
| Programmable On-Board? | Yes (for RKE portion, transponder requires diagnostic tool) |
| Cuts Required? | Yes, for integrated key |
Step-by-step on-board programming
The 2016 GMC Yukon supports on-board programming for the Remote Keyless Entry (RKE) portion of your key fob. This procedure will allow you to lock, unlock, and remote start your vehicle. However, it's crucial to understand that this procedure will NOT program the immobilizer transponder chip inside the key, which is required for the vehicle to start. The transponder chip must be programmed using a specialized diagnostic scan tool, typically performed by a locksmith or a GMC dealership.
To program the RKE portion of your key fob:
- Enter the vehicle and close all doors. Ensure the vehicle is off and the parking brake is set.
- Insert the working key (or the new key/fob that has a cut blade) into the ignition.
- Turn the ignition to the "ON" position (without starting the engine).
- Press and hold the unlock and lock buttons on the existing, working key fob simultaneously for approximately 15 seconds. The vehicle's horn may chirp, or the dash indicators may flash to confirm entry into programming mode.
- Release the buttons on the working key fob.
- Immediately, within 5 seconds, press and hold the unlock and lock buttons on the new (unprogrammed) key fob simultaneously for approximately 15 seconds. The vehicle's horn may chirp, or the dash indicators may flash to confirm successful programming.
- Repeat step 6 for any additional key fobs you wish to program.
- Turn the ignition to the "OFF" position to exit programming mode.
- Test all programmed key fobs to ensure they lock, unlock, and remote start the vehicle.
Important: As mentioned, if your new key fob has an integrated key blade, that blade will need to be cut to match your vehicle's ignition and door locks. This can be done by a locksmith or a dealership.
Battery replacement
The 2016 GMC Yukon key fob uses a single CR2032 coin cell battery.
To replace the battery:
- Locate the small release button or slot on the side or bottom of the key fob. Press the button or insert a small flathead screwdriver into the slot to separate the two halves of the fob.
- Carefully pry apart the key fob halves. You may need to use a small prying tool or a flathead screwdriver.
- Remove the old CR2032 battery. Note its orientation (positive side typically facing up).
- Insert the new CR2032 battery with the positive (+) side facing the same direction as the old battery.
- Align the two halves of the key fob and press them firmly together until they click securely into place.
- Test the key fob to ensure it is working correctly.
Where to buy a replacement fob
When looking for a replacement key fob for your 2016 GMC Yukon, you have several options, each with pros and cons:
- GMC Dealership:
- Pros: Guaranteed to be an authentic OEM part, often includes programming (both RKE and transponder) in the price, and warranty. You
More specs for the 2016 GMC Yukon
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Same spec — other model years
Maintenance & repair guides
2016 GMC Yukon Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.