2016 GMC Yukon Torque Specifications
An ASE-certified master technician's guide to proper torque specs for your 2016 GMC Yukon.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2016 GMC Yukon? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 140 / 190 | Re-torque after 50-100 miles |
| Oil Drain Plug | 18 / 25 | Always use a new gasket |
| Transmission Drain Plug | 18 / 25 | N/A |
| Front Brake Caliper Bracket Bolts | 148 / 200 | Apply threadlocker |
| Rear Brake Caliper Bracket Bolts | 111 / 150 | Apply threadlocker |
| Front Brake Caliper Slide Pins | 24 / 32 | Lubricate slide pins |
| Rear Brake Caliper Slide Pins | 20 / 27 | Lubricate slide pins |
| Front Axle Nut | 155 / 210 | Always use a new cotter pin |
| Spark Plugs | 11 / 15 | Use a calibrated torque wrench |
| Valve Cover Bolts | 89 lb-in / 10 | Tighten in sequence |
| Intake Manifold Bolts | 89 lb-in / 10 (first pass), 18 lb-ft / 25 (final pass) | Tighten in sequence |
Wheel lug torque pattern
When tightening the lug nuts on your 2016 GMC Yukon, it's crucial to follow a star or cross pattern. This ensures the wheel is seated evenly against the hub, preventing vibration and stress on the wheel studs. Start with one lug nut, then tighten the one directly across from it. Continue this pattern until all lug nuts are snug. Then, in the same pattern, torque them to the final specification.
Brake torque notes
For brake-related fasteners, cleanliness and proper preparation are as important as the torque value itself. Before re-installing the caliper bracket bolts, clean the threads on the bolt and in the knuckle. Apply a fresh drop of thread-locking compound to the bolt threads to prevent them from loosening over time. For the caliper slide pins, ensure they are clean and free of old grease. Lubricate them with a high-temperature silicone-based brake grease. This allows the caliper to move freely and ensures even pad wear.
Why torque matters
Torque is the rotational equivalent of force, and every fastener on your vehicle has a specific torque value for a reason. Over-tightening a fastener can stretch the threads, damaging the bolt and the component it's holding. In a worst-case scenario, an over-tightened bolt can break, leading to a catastrophic failure. Under-tightening is equally dangerous. A loose fastener can vibrate, causing it to loosen further and eventually fall out. This can lead to anything from a fluid leak to a wheel coming off while driving. Using a calibrated torque wrench is the only way to ensure each fastener is tightened to the manufacturer's specification. This is especially critical for components like wheels, brakes, and engine parts. A properly torqued fastener is a safe fastener. When in doubt, always refer to the OEM service manual for the most accurate and up-to-date information.
Disclaimer: The torque specifications listed above are for reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle and submodel. Repairius is not responsible for any damage or injury resulting from the use of this information.
Find a trusted shop on Repairius.
More specs for the 2016 GMC Yukon
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2016 GMC Yukon Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.