2020 GMC Yukon Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 GMC Yukon? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 140 ft-lb (190 Nm) | Star pattern |
| Oil Drain Plug | 18 ft-lb (24 Nm) | Replace washer |
| Transmission Drain Plug | 20-25 ft-lb (27-34 Nm) | Check fluid level and type |
| Brake Caliper Bracket Bolts (Front) | 129 ft-lb (175 Nm) | |
| Brake Caliper Bracket Bolts (Rear) | 103 ft-lb (140 Nm) | |
| Brake Caliper Guide Pins (Front) | 26-30 ft-lb (35-41 Nm) | Apply threadlocker if specified |
| Brake Caliper Guide Pins (Rear) | 23-26 ft-lb (31-35 Nm) | Apply threadlocker if specified |
| Front Axle Nut | 155 ft-lb (210 Nm) | New nut recommended |
| Rear Axle Nut | 160 ft-lb (217 Nm) | New nut recommended |
| Spark Plugs | 11 ft-lb (15 Nm) | |
| Valve Cover Bolts | 89 in-lb (10 Nm) | |
| Intake Manifold Bolts | 89 in-lb (10 Nm) | Torque in sequence if specified |
Wheel lug torque pattern
The 2020 GMC Yukon uses a star pattern for its wheel lug nuts. This ensures even pressure distribution and proper wheel seating against the hub. Always tighten in stages, gradually increasing torque until the final specification is reached.
Brake torque notes
When working on the braking system, it's critical to ensure all fasteners are torqued correctly. Brake caliper bracket bolts are under immense stress during braking and must be tightened to specification to prevent catastrophic failure. Brake caliper guide pins, often called slide pins, allow the caliper to move freely. Proper torque here ensures even pad wear and optimal braking performance. Always inspect the guide pin boots for tears and replace them if damaged to prevent contamination.
Why torque matters
Precise torque is paramount in automotive repair for several reasons. Under-torquing can lead to fasteners loosening over time due to vibration and stress, potentially causing components to detach. For example, an under-torqued wheel lug nut could lead to a wheel detaching from the vehicle, a highly dangerous situation. Similarly, an under-torqued oil drain plug could leak, leading to oil loss and potential engine damage. An improperly torqued spark plug can lead to compression loss, misfires, or even damage to the cylinder head.
Conversely, over-torquing can stretch and weaken fasteners, making them prone to snapping. It can also strip threads in critical components like engine blocks or cylinder heads, leading to much more extensive and costly repairs. Gaskets can also be crushed and damaged by over-torquing, leading to leaks.
Using a calibrated torque wrench is essential for accurate torque application. Always clean threads and ensure they are free of debris or rust before tightening. Follow the manufacturer's specifications precisely for all fasteners.
Disclaimer: Always refer to the official 2020 GMC Yukon OEM service manual for the most accurate and up-to-date torque specifications. This guide is for informational purposes only and should not replace professional advice or the manufacturer's documentation, especially for critical safety components.
Find a trusted shop on Repairius.
More specs for the 2020 GMC Yukon
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 GMC Yukon Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.