2019 GMC Yukon Torque Specifications
An essential guide for DIY mechanics and professional technicians working on the 2019 GMC Yukon. Find key torque specs for wheels, brakes, and engine components.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 GMC Yukon? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference Torque Specifications: 2019 GMC Yukon
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 140 / 190 | Always re-torque after 50-100 miles. |
| Oil Drain Plug | 18 / 25 | Always use a new gasket. |
| Transmission Drain Plug | 15-20 / 20-27 | Consult service manual for fluid type. |
| Front Brake Caliper Bracket Bolts | 120-130 / 163-176 | May require thread locker. |
| Front Brake Caliper Slide Pins | 25-30 / 34-41 | Lubricate with high-temp silicone grease. |
| Rear Brake Caliper Bracket Bolts | 110-120 / 149-163 | May require thread locker. |
| Rear Brake Caliper Slide Pins | 25-30 / 34-41 | Lubricate with high-temp silicone grease. |
| Front Axle Nut | 175-185 / 237-251 | Single-use nut, always replace. |
| Spark Plugs | 11-15 / 15-20 | Use a dedicated spark plug socket. |
| Valve Cover Bolts | 8-10 / 11-14 | Tighten in sequence from center outwards. |
| Intake Manifold Bolts | 8-10 / 11-14 | Tighten in sequence. First pass, then final torque. |
Wheel Lug Torque Pattern
When tightening the lug nuts on your 2019 GMC Yukon, it is critical to use a star or cross pattern. This ensures the wheel is seated evenly against the hub, preventing vibration and potential damage. Never tighten lug nuts in a circular pattern. Start with one lug nut, then tighten the one directly across from it. Continue this pattern until all lug nuts are tightened to the initial snug-fit. Then, repeat the pattern to apply the final torque value.
Brake Torque Notes
The torque values for brake components are especially critical. The caliper bracket bolts are a high-torque, critical fastener. Some technicians may apply a thread-locking compound for added security. Caliper slide pins, on the other hand, require a much lower torque setting. Overtightening can cause the pins to bind, leading to uneven pad wear and braking problems. Always ensure the slide pins are clean and properly lubricated before reassembly.
Why Torque Matters
Torque is the rotational force applied to a fastener. Every bolt on your Yukon is engineered to be tightened to a specific torque value for a reason. Overtightening a fastener can stretch the threads, damaging the bolt or the component it threads into. This can lead to stress fractures and catastrophic failure. Undertightening is equally dangerous. An undertightened bolt can vibrate loose, leading to a loss of clamping force. In a worst-case scenario, this could mean a wheel coming off while driving or a critical engine component failing. Using a calibrated torque wrench is the only way to ensure every fastener is tightened to the manufacturer's specification.
Disclaimer: The torque values listed above are for general reference and may vary based on specific submodel and equipment. Always consult the OEM service manual for the most accurate and up-to-date information for your specific vehicle. Critical fasteners should always be verified in the OEM service manual.
Find a trusted shop on Repairius.
More specs for the 2019 GMC Yukon
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 GMC Yukon Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.