2025 Honda Accord Wheel Alignment Specifications
Working on this 2025 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
2025 Honda Accord factory oil capacity
| Engine | Capacity | Oil | Filter |
|---|---|---|---|
| 1,498 cm³ — Gasoline | 3.7 qt (3.5 L) | Honda Genuine Motor Oil 0W-20 | — |
| 1,993 cm³ — Hybrid | 4.2 qt (4.0 L) | Honda Genuine Motor Oil 0W-20 | — |
Source: American Honda Motor Co., Inc. Honda owner manuals — indexed specifications, checked 2026-11-18. Values as printed. Oil capacity finder →
Quick reference
| Angle | Front Pref | Front Range | Rear Pref | Rear Range |
|---|---|---|---|---|
| Camber | -0.3° | -0.8° to 0.2° | -0.8° | -1.3° to -0.3° |
| Caster | 7.2° | 6.7° to 7.7° | N/A | N/A |
| Total Toe | 0.00° | -0.08° to 0.08° | 0.17° | 0.08° to 0.25° |
| Individual Toe | 0.00° | -0.04° to 0.04° | 0.08° | 0.04° to 0.13° |
| SAI | 13.0° | 12.5° to 13.5° | N/A | N/A |
| Thrust Angle | N/A | N/A | N/A | -0.08° to 0.08° |
Adjustability
The 2025 Honda Accord offers limited factory adjustment for wheel alignment angles. On the front axle, you can typically adjust total toe and individual toe through the tie rod ends. However, front camber and caster are generally non-adjustable from the factory. If these angles fall outside the acceptable range due to damage or wear, aftermarket solutions like camber bolts or eccentric bushings may be necessary, or it could indicate bent suspension components.
For the rear axle, total toe and individual toe are usually adjustable. However, rear camber is typically not adjustable from the factory. Similar to the front, if rear camber is out of specification, it often points to worn or damaged suspension parts or may require aftermarket camber kits to bring it back into spec. Thrust angle is a calculated angle and is influenced by the rear individual toe values.
Recommended adjustment hardware
For most minor adjustments within the factory-specified ranges, the 2025 Honda Accord's stock components are sufficient for toe adjustments. However, if you find that front camber or caster, or rear camber, are consistently outside the acceptable range and cannot be brought back into spec, even after ruling out worn or damaged components, you might consider aftermarket options. Companies like SPC Performance or Eibach often offer specialized camber bolts or adjustable control arms that provide a greater range of adjustment for non-adjustable angles. Always consult with a qualified alignment technician before installing aftermarket parts to ensure compatibility and to determine if they are truly necessary.
Symptoms of bad alignment
Misaligned wheels can manifest in several ways, often impacting tire wear, handling, and fuel economy. Here are common symptoms:
- Uneven tire wear: This is often the most noticeable sign.
- Feathering: Tires have a saw-tooth feel across the tread, indicating incorrect toe settings. The tire rubs sideways as it rolls.
- Inner or outer shoulder wear: Excessive wear on one edge of the tire suggests incorrect camber. Positive camber wears the outer edge, while negative camber wears the inner edge.
- Cupping or scalloping: Irregular dips and rises around the tire's circumference, often linked to worn suspension components, but can be exacerbated by alignment issues.
- Vehicle pulling or drifting: The car consistently wants to steer to one side even on a flat road. This can be caused by incorrect caster or camber settings on one side, or a significant difference in toe settings between the front wheels.
- Steering wheel not centered: Your steering wheel is crooked when driving straight. This is almost always an indication of incorrect toe settings.
- Loose or vague steering: The car might feel less responsive or require more effort to keep straight.
- Vibrations: While often related to tire imbalance, severe misalignments can sometimes contribute to vibrations, especially at higher speeds.
When to align
It's crucial to have your 2025 Honda Accord's alignment checked in several situations to maintain optimal performance and tire life:
- After suspension or steering component replacement: Any time parts like tie rods, control arms, ball joints, struts, or springs are replaced, an alignment is mandatory. Even minor changes can significantly alter alignment angles.
- After installing new tires: New tires are a significant investment. Proper alignment ensures they wear evenly and last longer.
- After hitting a pothole, curb, or other road hazard: A severe impact can bend or damage suspension components, throwing off the alignment.
- If you notice any symptoms of bad alignment: Don't wait until tire wear is severe. Address alignment issues promptly.
- As part of routine maintenance: Many manufacturers recommend an alignment check annually or every 15,000 miles, even if no obvious issues are present. This helps catch minor deviations before they become serious problems.
Typical alignment cost
The typical cost for a wheel alignment on a 2025 Honda Accord can vary depending on your location, the type of shop (dealership vs. independent), and whether a two-wheel or four-wheel alignment is performed (most modern vehicles benefit from a four-wheel alignment). Generally, you can expect to pay anywhere from $100 to $200 for a standard alignment. If specialized adjustments or aftermarket parts are required, the cost could be higher. Always ask for a detailed estimate before any work begins.
Find a trusted alignment shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2025 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2025 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-30.