Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2025 Honda Accord — Oil Capacity & Filter

    Everything on this vehicle

    Exact oil capacity, viscosity, oil spec, filter cross‑refs, torque, and service tips

    Working on this 2025 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2025 Honda Accord factory oil capacity

    EngineCapacityOilFilter
    1,498 cm³ — Gasoline3.7 qt (3.5 L)Honda Genuine Motor Oil 0W-20—
    1,993 cm³ — Hybrid4.2 qt (4.0 L)Honda Genuine Motor Oil 0W-20—

    Source: American Honda Motor Co., Inc. Honda owner manuals — indexed specifications, checked 2026-11-18. Values as printed. Oil capacity finder →

    The 2025 Honda Accord takes 3.7 quarts (3.5 liters) of oil with the 1.5L turbo, or 4.4 quarts (4.2 liters) with the 2.0L hybrid—both capacities are with a new filter installed.

    Quick answer

    • Oil capacity (with filter):
      • 1.5L turbo: 3.7 qt (3.5 L)
      • 2.0L hybrid: 4.4 qt (4.2 L)
    • Recommended oil weight: 0W-20 full synthetic
    • Oil type/spec: API SP, ILSAC GF-6 (resource conserving)
    • Oil filter part numbers:
      • OEM Honda: 15400-PLM-A02 (or latest supersession—confirm with dealer by VIN)
      • Popular aftermarket cross-references: Fram XG7317/PH7317, Wix 57356, Mobil 1 M1-110A

    Capacity by engine option

    EngineOil capacity w/ filterOil weightOil spec
    1.5L Turbo (L15BE)3.7 qt (3.5 L)0W-20API SP / ILSAC GF-6
    2.0L Hybrid (Atkinson)4.4 qt (4.2 L)0W-20API SP / ILSAC GF-6

    Oil change interval

    • Normal service: Follow the Honda Maintenance Minder; typically up to 7,500–10,000 miles or 12 months, whichever comes first.
    • Severe service (frequent short trips, extreme temps, dusty roads, lots of idling/towing): 5,000 miles or 6 months is a prudent maximum, or whenever the Maintenance Minder calls for service sooner.
    • Always replace the filter with each oil change.

    Drain plug torque

    • Drain plug torque: 29 lb-ft (39 N·m)
    • Crush washer: 14 mm aluminum washer; replace at every oil change to prevent seepage. Do not reuse a flattened washer.

    How to change the oil

    1. Warm the engine for a few minutes, then shut it off and let it sit 2–3 minutes.
    2. For hybrids: Ensure the vehicle is OFF and not in READY; avoid pressing the brake while powering accessories. Chock wheels and use jack stands on level ground.
    3. Remove the underbody service panel/door (if equipped) to access the drain plug and filter.
    4. Place a drain pan under the plug. Remove the plug with a 17 mm socket. Let oil drain fully.
    5. Install a new crush washer on the plug and torque to 29 lb-ft.
    6. Spin off the old filter. Lightly oil the new filter’s gasket and install hand-tight: turn until gasket contacts, then an additional 3/4 turn (or per filter maker’s instructions).
    7. Fill the engine with the correct amount of 0W-20 (start with about 0.3–0.5 qt less than spec), then check dipstick and top off to the upper mark.
    8. Start the engine and check for leaks. Shut off, wait 2–3 minutes, recheck level, and adjust if needed.
    9. Reset the Maintenance Minder through the steering wheel controls.
    10. Reinstall the underbody panel securely and verify all clips/fasteners.

    Common issues / tips for this generation

    • Underbody panel clips: The Accord’s splash shield uses plastic clips and a small service door—ensure clips are fully seated to prevent rattles or loss. Keep some spare clips on hand.
    • Hybrid safety: The hybrid engine can start unexpectedly if the car is in READY. Keep the vehicle OFF and the key away from the car during service. Do not press the brake while powering accessories. If unsure, consult the owner’s manual for maintenance mode procedures.
    • Use the correct spec oil: Honda calibrates the 1.5T and the hybrid for 0W-20, API SP/ILSAC GF-6. Thicker oils can affect VTEC/cam phasing and cold-start protection.
    • Top-off strategy: The 1.5T typically takes close to 3.7 qt with a new filter; the hybrid takes about 4.4 qt. Always verify on the dipstick—do not exceed the upper mark.
    • Turbo care (1.5T): After an oil change, let the engine idle 30–60 seconds before driving to ensure full oil circulation. Use quality filters that meet OEM flow/anti-drainback specs.
    • Aluminum pan threads: The drain bung is aluminum—use a torque wrench. Over-tightening can strip threads; under-tightening can weep.
    • Filters and cross-refs: The Honda OEM 15400-PLM-A02 is widely used; some dealers may supply a superseded number. Aftermarket equivalents include Fram XG/PH7317, Wix 57356, and Mobil 1 M1-110A. If in doubt, consult your Honda dealer with your VIN.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2025 Honda Accord

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-16.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email