Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Spark Plug Type & Gap

    2025 Honda Accord Spark Plug Type & Gap

    Everything on this vehicle

    Working on this 2025 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2025 Honda Accord factory oil capacity

    EngineCapacityOilFilter
    1,498 cm³ — Gasoline3.7 qt (3.5 L)Honda Genuine Motor Oil 0W-20—
    1,993 cm³ — Hybrid4.2 qt (4.0 L)Honda Genuine Motor Oil 0W-20—

    Source: American Honda Motor Co., Inc. Honda owner manuals — indexed specifications, checked 2026-11-18. Values as printed. Oil capacity finder →

    Quick Reference

    EngineOEM Plug PNAftermarket (NGK/Denso)Gap (in/mm)Torque (lb-ft / Nm)Interval
    1.5L Turbo (L15BE)NGK DILKAR7B11NGK DILKAR7B11, Denso FXE20HR110.044 in / 1.1 mm11 lb-ft / 15 Nm100,000 miles (160,000 km)
    2.0L Hybrid (LFA1)NGK ILKAR7L11NGK ILKAR7L11, Denso FXE20HR110.044 in / 1.1 mm11 lb-ft / 15 Nm100,000 miles (160,000 km)

    Why the right plug matters

    Choosing the correct spark plug for your 2025 Honda Accord is more critical than you might think. Spark plugs are not "one size fits all." The wrong plug can lead to misfires, reduced fuel economy, decreased engine performance, and even costly engine damage. There are three primary aspects to consider: heat range, electrode material, and proper gapping.

    Heat Range

    Spark plugs are designed with a specific "heat range," which refers to their ability to dissipate heat. A "hot" plug retains more heat, while a "cold" plug dissipates heat more quickly. Using a plug that's too hot for your engine can lead to pre-ignition and detonation, which can severely damage engine components. Conversely, a plug that's too cold can foul more easily due to carbon buildup, leading to misfires and poor performance. Honda engineers meticulously select the optimal heat range for each engine to ensure efficient combustion and longevity.

    Electrode Metal: Iridium vs. Platinum vs. Copper

    • Iridium: This is the most common and recommended material for modern Honda engines, including the 2025 Accord. Iridium is incredibly durable and boasts a very high melting point, allowing for very fine electrodes. This thin electrode design concentrates the spark, improving ignition efficiency and extending plug life significantly – often up to 100,000 miles or more. Both the 1.5L Turbo and 2.0L Hybrid engines in the 2025 Accord use iridium spark plugs as OEM.
    • Platinum: While not typically found in the 2025 Accord as OEM, platinum plugs offer a longer lifespan than copper plugs, though not as long as iridium. They are a good balance of performance and durability for some applications.
    • Copper: These are the traditional spark plugs, offering excellent conductivity. However, copper is a softer metal, and the electrodes wear down more quickly, requiring more frequent replacement intervals. You generally won't find copper plugs used in modern, high-performance or long-life applications like the 2025 Honda Accord due to their short lifespan.

    How to gap a spark plug

    Properly gapping your spark plugs is essential for optimal performance. The gap is the distance between the center and ground electrodes. An incorrect gap can lead to weak sparks, misfires, and poor fuel efficiency. While most iridium plugs come pre-gapped from the factory, it's always a good practice to double-check.

    To gap a spark plug, you'll need a gap gauge, preferably a wire-type gauge, as penny-style gauges can damage the fine iridium tip. Gently slide the correct wire gauge between the electrodes. If the gap is too small, carefully use the gapping tool's lever to slightly bend the ground electrode outwards. If the gap is too wide, gently tap the ground electrode on a hard, non-marring surface to close the gap. Always be extremely careful not to touch or damage the delicate iridium center electrode.

    For the 2025 Honda Accord, both the 1.5L Turbo and 2.0L Hybrid engines require a spark plug gap of 0.044 inches (1.1 mm).

    Replacement procedure tips

    Replacing spark plugs on your 2025 Honda Accord is a manageable DIY task for those with some mechanical experience, but always proceed with caution.

    Coil-on-plug removal

    The 2025 Honda Accord uses a coil-on-plug (COP) ignition system. This means each spark plug has its own ignition coil mounted directly above it. To access the spark plugs, you'll first need to disconnect the electrical connector from each coil and then carefully remove the coil retaining bolt (if present). Once the bolt is out, gently twist and pull the coil straight up to remove it. Avoid prying on the coil or its connector, as this can cause damage.

    Anti-seize debate

    There's ongoing discussion about whether to use anti-seize compound on spark plug threads. For modern spark plugs with nickel-plated shells, manufacturers like NGK generally advise against it. The nickel plating provides adequate corrosion resistance and anti-seize properties. Applying anti-seize can act as an electrical insulator and, more critically, can lead to over-torquing. Anti-seize lubricates the threads, causing the torque wrench to reach its setting prematurely, resulting in the plug being tighter than intended. This can strip the cylinder head threads or make future removal difficult.

    For the 2025 Honda Accord, it's best to follow the spark plug manufacturer's recommendation, which for most modern plugs is to install them dry.

    Dielectric grease on boots

    Applying a small amount of dielectric grease inside the spark plug boot (the rubber part that connects to the top of the spark plug) is a good practice. Dielectric grease acts as an insulator, preventing voltage leakage and helping to seal out moisture and contaminants. It also makes future removal of the coil pack much easier by preventing the boot from sticking to the porcelain insulator of the spark plug.

    Known issues

    Fortunately, the 2025 Honda Accord, with its modern engine designs, doesn't have the widespread, notorious spark plug issues seen in some other vehicles (like the Ford 3-valve engine's propensity for broken two-piece plugs). However, proper maintenance and using the correct spark plugs are still paramount to avoid potential problems such as:

    • Misfires: Often caused by incorrect gap, fouled plugs, or a failing ignition coil. Regular replacement of spark plugs at the recommended interval (100,000 miles for the 2025 Accord) helps prevent this.
    • Damaged Coils: Incorrectly gapped plugs or plugs with excessive wear can increase the load on the ignition coils, potentially shortening their lifespan.

    Need plugs replaced? Find a shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2025 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email