Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Wheel Alignment Specifications

    2022 Honda CR-V Wheel Alignment Specifications

    Everything on this vehicle

    Working on this 2022 Honda CR-V? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    AngleFront PrefFront RangeRear PrefRear Range
    Camber-0°15'-0°45' to 0°15'-0°40'-1°20' to 0°00'
    Caster7°00'6°05' to 7°55'Not ApplicableNot Applicable
    Total Toe0°00'-0°08' to 0°08'0°10'0°00' to 0°20'
    Individual Toe0°00'-0°04' to 0°04'0°05'0°00' to 0°10'
    SAI14°44'13°59' to 15°29'Not ApplicableNot Applicable
    Thrust AngleNot ApplicableNot Applicable0°00'-0°10' to 0°10'

    Adjustability

    On the 2022 Honda CR-V, front total toe is adjustable from the factory using the tie rod ends. Rear total toe is also adjustable via eccentric cams on the lower control arms.

    However, front and rear camber, and front caster, are not directly adjustable from the factory. If these angles are found to be outside of the specified range, it often indicates worn or damaged suspension components that need to be replaced. In some cases, aftermarket solutions like camber bolts or adjustable control arms can be installed to allow for camber or caster adjustment if within a small range.

    Recommended adjustment hardware

    For the 2022 Honda CR-V, assuming no bent or worn parts, only the tie rod ends at the front and eccentric cams at the rear are needed for typical toe adjustments.

    If you find that your camber or caster measurements are out of specification and no worn or damaged parts are present, specialized aftermarket components may be necessary. For minor front camber or caster corrections, aftermarket eccentric bolts (often referred to as "camber bolts") can be installed in the strut to knuckle mounts. For more significant adjustments or for rear camber correction, tubular control arms or adjustable ball joints might be required. Always consult with a qualified alignment technician to determine the best solution for your specific situation.

    Symptoms of bad alignment

    A misaligned 2022 Honda CR-V can exhibit several noticeable symptoms:

    • Uneven Tire Wear: This is the most common indicator.
      • Feathering: When the tread blocks are worn higher on one side and lower on the other, creating a feathered feel when you run your hand across the tire. This often points to incorrect toe settings.
      • Camber Wear (Inner or Outer): Excessive positive or negative camber will cause accelerated wear on either the inner or outer edge of the tire. Inner edge wear indicates too much negative camber, while outer edge wear suggests too much positive camber.
      • Cupping/Scalloping: Potholes and worn shocks or struts are also causes, however a bad alignment also causes uneven dips around the tire's circumference.
    • Vehicle Pulling or Drifting: Your CR-V may consistently pull to one side, even on a flat road, requiring you to constantly correct the steering to keep it going straight.
    • Off-Center Steering Wheel: Even when driving straight, the steering wheel may not be centered.
    • Loose or Wandering Steering: The vehicle may feel unstable, requiring constant small corrections to maintain a straight path.
    • Squealing Tires: Tires that squeal during turns, even at low speeds, can be a sign of excessive toe or camber.

    When to align

    Regular wheel alignment checks are crucial to maintain your 2022 Honda CR-V's handling, tire life, and fuel economy. Consider an alignment in these situations:

    • After Suspension or Steering Component Replacement: Any time components like tie rod ends, ball joints, control arms, struts, or shocks are replaced, alignment is a must.
    • After Installing New Tires: To ensure you get the maximum life and performance from your new tires, an alignment is recommended.
    • After an Accident or Hitting a Large Pothole/Curb: Even a minor incident can knock your alignment out of specification.
    • Every 15,000 Miles or Annually: Regular inspections can catch minor issues before they become significant problems.
    • If You Notice Any of the Symptoms of Bad Alignment: Don't wait; address alignment issues promptly to prevent further tire wear or handling problems.

    Typical alignment cost

    Average costs for an alignment on a 2022 Honda CR-V in the United States typically range from $100 to $180. This price can vary depending on your location, the specific shop, and if any additional adjustments or parts are needed. Some shops offer a "lifetime alignment" package for a higher upfront cost, which can be a good value if you plan on keeping your vehicle for an extended period or frequently encounter conditions that warrant alignments.

    Find a trusted alignment shop on Repairius.

    Need service on your Honda CR-V?

    Request service from shops in your area.

    More specs for the 2022 Honda CR-V

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-22.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email