2022 Honda CR-V — Torque Specifications
Working on this 2022 Honda CR-V? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 80-92 ft-lb (108-125 Nm) | Apply to clean, dry studs. |
| Oil Drain Plug | 29-33 ft-lb (39-45 Nm) | Replace washer with each service. |
| Transmission Drain Plug | 36 ft-lb (49 Nm) | For automatic transmission, replace washer. |
| Front Brake Caliper Bracket Bolts | 80 ft-lb (108 Nm) | |
| Rear Brake Caliper Bracket Bolts | 41 ft-lb (56 Nm) | |
| Brake Caliper Slide Pins | 18-25 ft-lb (24-34 Nm) | Apply high-temp grease to pins. |
| Front Axle Nut | 181 ft-lb (245 Nm) | Use new nut, stake after torquing. |
| Rear Axle Nut | 167 ft-lb (226 Nm) | Use new nut, stake after torquing. |
| Spark Plugs | 13 ft-lb (18 Nm) | For 1.5L and 2.4L engines. |
| Valve Cover Bolts | 8-9 ft-lb (11-12 Nm) | Torque in a criss-cross pattern. |
Wheel lug torque pattern
The 2022 Honda CR-V uses a star (or cross) pattern for wheel lug nut torque. This ensures even pressure distribution around the wheel, preventing warping and ensuring secure fitment. Tighten the lug nuts in opposing sequences until all are at the specified torque.
Brake torque notes
When servicing the brakes on your 2022 Honda CR-V, accurate torque for caliper bracket bolts and slide pins is essential for safety and optimal performance. Overtightening can strip threads or crack components, while undertightening can lead to loose calipers, excessive pad wear, and even brake failure. Always clean old thread locker and apply new if specified by Honda. For caliper slide pins, ensure they are clean and properly lubricated with high-temperature grease before reinstallation to allow for smooth caliper movement.
Why torque matters
Proper fastener torque is crucial for the safe and reliable operation of any vehicle, and the 2022 Honda CR-V is no exception. Every bolt and nut on your vehicle is designed to be tightened to a specific tension, which is measured in foot-pounds (ft-lb) or Newton-meters (Nm). This precise tension ensures that components are held together securely without being overstressed.
Incorrect torque can lead to a variety of problems:
-
Undertightening: Fasteners can loosen over time due to vibrations and thermal expansion/contraction, leading to components rattling, premature wear, fluid leaks, or even catastrophic failure. For critical components like wheel lugs or brake calipers, undertightening presents a significant safety risk.
-
Overtightening: Applying too much torque can stretch or strip threads, damage fastener heads, or crack the components being joined. This compromises the integrity of the connection, making it prone to failure. Overtorquing can also lead to uneven pressure, causing warping in parts like brake rotors or valve covers.
Using a calibrated torque wrench is the only way to ensure that fasteners are tightened to the manufacturer's specifications. This not only guarantees the longevity of your vehicle's components but, more importantly, ensures your safety and the safety of your passengers. Always refer to a specific, up-to-date service manual for the most accurate torque values and procedures for your specific year, make, and model.
Disclaimer: Always consult the official Honda service manual for the most accurate and up-to-date torque specifications and procedures for your 2022 Honda CR-V. This information is provided for general guidance only and should not replace professional advice or the instructions found in the manufacturer's service manual, especially for critical safety components.
Find a trusted shop on Repairius.
More specs for the 2022 Honda CR-V
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2022 Honda CR-V Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-07.