2020 Jeep Gladiator Paint Codes

Quick Reference

Where to Find Your Paint Code

For your 2020 Jeep Gladiator, the paint code is most commonly located on a sticker on the driver's side door jamb. Open the driver's door and look for a label on the B-pillar (the vertical car body section that the door latches to) or on the edge of the door itself. This sticker will contain various vehicle information, and your paint code will typically be listed under a "Paint" or "Color" heading. It's usually a three-character alphanumeric code. In some cases, it might also be found on a sticker under the hood.

Failing that, your local Jeep dealership parts department can tell you exactly what your paint code is by providing them with your Vehicle Identification Number (VIN). This is often the most reliable method, especially if the door jamb sticker is damaged or missing.

Best Touch-Up Paint Sources

• Dupli-Color: A widely available brand offering brush bottles, paint pens, and aerosol cans for minor scratches and chips. You can often find Dupli-Color products at automotive parts stores and online retailers. Be sure to match your paint code exactly.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint to precisely match your vehicle's factory color. They offer a comprehensive range of products, including pens, bottles, aerosol cans, and even larger quantities for more extensive repairs. Their custom mixing often provides a better match, particularly for metallic and pearl finishes.
• Tcoat Custom-Mix: Similar to AutomotiveTouchup, Tcoat provides high-quality, custom-mixed paints. They are known for their accuracy and offer various application options.
• Dealership: Your local Jeep dealership can also supply you with OEM (Original Equipment Manufacturer) touch-up paint specifically formulated for your Gladiator. This can be a good option for ensuring the best possible color match, though it may be slightly more expensive.

How to Use Touch-Up Paint

Using touch-up paint effectively requires a few simple steps to achieve the best results:

1. Clean the Area: Thoroughly clean the chipped or scratched area with soap and water, then an automotive degreaser or rubbing alcohol. Ensure it's completely dry before proceeding.
2. Apply Primer (if needed): For deeper scratches that expose bare metal or plastic, a thin layer of primer is essential for adhesion and rust prevention. Allow it to dry completely according to the product instructions.
3. Apply Base Coat: Apply the touch-up paint in thin, even layers. For pens or brush bottles, just dab the paint into the chip or scratch, building it up slowly. For aerosol cans, hold the can about 6-10 inches away and use light, overlapping passes. Allow each coat to dry before applying the next. Multiple thin coats are better than one thick coat.
4. Apply Clear Coat: Once the base coat is dry, apply a clear coat. This protects the paint and provides the factory shine. Apply in thin layers, allowing each to dry. This is crucial for durability and a good finish.
5. Cure and Polish: Allow the paint to fully cure (this can take several days). Once cured, you can lightly buff the area with a polishing compound designed for clear coats to blend it seamlessly with the surrounding paint.

Color Matching Tips for Pearls and Tri-Coats

Pearl and tri-coat paints, like the Hydro Blue Pearlcoat or Snazzberry Pearlcoat on your Gladiator, can be more challenging to match perfectly due to their multi-layer composition. These paints achieve their depth and iridescence through multiple layers, typically a colored base coat, a translucent pearl mid-coat, and a clear coat. When touching up:

• Layering is Key: It's even more critical to apply these paints in very thin, even layers, allowing each to dry fully. The pearl effect comes from the way light reflects off the mid-coat, so proper layering is essential.
• Practice First: If you're using an aerosol, consider practicing on a spare piece of metal or an inconspicuous area first to get a feel for the application and how the pearl effect develops.
• Consider Professional Help: For larger chips or scratches on pearl or tri-coat finishes, you might consider professional repair to ensure an invisible blend. Custom-mixed touch-up paints from AutomotiveTouchup or Tcoat are often better for these complex colors than generic options.

Find a trusted body shop on Repairius.