2020 Mercedes-Benz Metris Towing Capacity
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Mercedes-Benz Metris? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2020 Mercedes-Benz Metris can tow up to 5,000 pounds.
Quick answer
- Max towing capacity: 5,000 lbs
- Max payload: 2,425 lbs (Cargo Van) / 1,720 lbs (Passenger Van)
- GVWR: 6,834 lbs
- GCWR: 11,834 lbs
- Curb weight: 4,409 lbs (Cargo Van) / 5,114 lbs (Passenger Van)
- Hitch class: Class III
Tow ratings by engine & trim
| Engine | Drivetrain | Trim/Package | Max Tow | Payload |
|---|---|---|---|---|
| 2.0L 4-Cylinder Turbo | RWD | Cargo Van | 5,000 lbs | 2,425 lbs |
| 2.0L 4-Cylinder Turbo | RWD | Passenger Van | 5,000 lbs | 1,720 lbs |
Tow package contents
The Metris is available with a factory-installed tow package that includes a receiver hitch and a 7-pin wiring connector. Trailer sway control is a standard feature on all Metris models and is integrated with the electronic stability program. An integrated trailer brake controller is not available from the factory, so an aftermarket unit will be required for trailers with electric brakes. The standard 7G-TRONIC PLUS automatic transmission is equipped with a transmission cooler.
Weight distribution & WDH requirements
For trailers over 2,000 pounds, a weight-distributing hitch (WDH) is recommended to improve handling and stability. A WDH helps to distribute the tongue weight of the trailer more evenly across the axles of the van and trailer, which can help to prevent the rear of the van from squatting and the front from lifting. This improves steering, braking, and overall control. Always ensure the WDH is properly sized and adjusted for the trailer being towed.
Real-world towing tips for this vehicle
When towing with a Metris, it's important to be mindful of the vehicle's relatively short wheelbase and tall profile, which can make it more susceptible to crosswinds. Be sure to load the trailer properly, with 60% of the weight in front of the trailer axle and 40% behind. The tongue weight should be 10-15% of the total trailer weight. When driving, allow for longer stopping distances and be more cautious in windy conditions. The Metris's turbocharged engine provides ample torque for towing, but it's still important to use a lower gear when climbing steep grades to avoid overheating the engine and transmission.
Common towing-related issues
One of the most common towing-related issues with the Metris is trailer sway. This can be caused by improper trailer loading, excessive speed, or strong crosswinds. If you experience trailer sway, do not slam on the brakes. Instead, gradually reduce your speed and steer as little as possible. Another common issue is overheating the transmission. This can be avoided by using a lower gear when climbing hills and by not exceeding the vehicle's GCWR. Finally, be aware of the Metris's payload capacity. It's easy to overload a van, especially the cargo version, so be sure to weigh your loaded van and trailer to ensure you are within the manufacturer's limits.
Find a trusted shop on Repairius.
More specs for the 2020 Mercedes-Benz Metris
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Mercedes-Benz Metris Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.