2019 Mercedes-Benz Sprinter Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Mercedes-Benz Sprinter? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 133-148 ft-lb / 180-200 Nm | 14mm x 1.5 Pitch |
| Oil Drain Plug | 22 ft-lb / 30 Nm | Models With M642 Engine |
| Oil Drain Plug | 30 ft-lb / 40 Nm | Models With OM651 Engine |
| Oil Drain Plug | 19 ft-lb / 25 Nm | Models With OM640 Engine |
| Transmission Drain Plug (7G-Tronic) | 30-37 ft-lb / 40-50 Nm | |
| Transmission Drain Plug (9G-Tronic) | 8-10 ft-lb / 11-14 Nm | |
| Front Brake Caliper Bracket Bolts | 133-148 ft-lb / 180-200 Nm | |
| Rear Brake Caliper Bracket Bolts | 133-148 ft-lb / 180-200 Nm | |
| Front Brake Caliper Slide Pins | 22-26 ft-lb / 30-35 Nm | |
| Rear Brake Caliper Slide Pins | 22-26 ft-lb / 30-35 Nm | |
| Front Axle Nut | 295-332 ft-lb / 400-450 Nm | |
| Rear Axle Nut | 295-332 ft-lb / 400-450 Nm | |
| Glow Plugs | 11-15 ft-lb / 15-20 Nm | Diesel Engines |
| Valve Cover Bolts | 7-9 ft-lb / 9.5-12 Nm |
Wheel lug torque pattern
The 2019 Mercedes-Benz Sprinter uses a star/cross pattern for tightening wheel lug nuts. This ensures even pressure distribution and proper seating of the wheel. Always tighten in stages, gradually increasing torque until the final specification is reached.
Brake torque notes
When working on the braking system of your Sprinter, precise torque is paramount. Incorrectly torqued caliper bracket bolts can lead to unsafe braking conditions, while overtightening slide pins can cause them to bind, leading to uneven pad wear or seizing. Always clean threads thoroughly before reassembly and apply thread locker where specified by the OEM.
Why torque matters
Applying the correct torque to fasteners is crucial for the safe and reliable operation of your 2019 Mercedes-Benz Sprinter. Under-torquing can lead to components loosening over time, potentially causing dangerous failures, such as a wheel detaching or a fluid leak. Over-torquing, on the other hand, can stretch or strip threads, compromise the integrity of the fastener or component, and can even lead to fatigue and eventual failure. For critical components like wheel lug nuts, brake components, and engine/transmission fasteners, incorrect torque can have severe consequences.
Always use a calibrated torque wrench and follow the manufacturer's specifications. Remember that these specifications are for clean, dry threads unless otherwise specified. The use of lubricants can drastically change the effective torque applied, sometimes requiring a reduction in the specified value. If you're unsure, consult your OEM service manual.
Disclaimer: The torque specifications provided in this article are for general reference only. While every effort has been made to ensure accuracy, submodel variations and specific component updates may lead to different requirements. Always verify critical fastener torque specifications with the official OEM service manual for your specific 2019 Mercedes-Benz Sprinter model before performing any work.
Find a trusted shop on Repairius.
More specs for the 2019 Mercedes-Benz Sprinter
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Mercedes-Benz Sprinter Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.