2019 Nissan Frontier Wheel Alignment Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Nissan Frontier? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Angle | Front Pref | Front Range | Rear Pref | Rear Range |
|---|---|---|---|---|
| Camber | 0.0° | -0.75° to +0.75° | -0.25° | -1.00° to +0.50° |
| Caster | 3.0° | 2.0° to 4.0° | N/A | N/A |
| Total Toe | 0.0° | -0.10° to +0.10° | 0.0° | -0.20° to +0.20° |
| Individual Toe | 0.0° | -0.05° to +0.05° | 0.0° | -0.10° to +0.10° |
| SAI | 12.5° | 11.5° to 13.5° | N/A | N/A |
| Thrust Angle | N/A | N/A | 0.0° | -0.25° to +0.25° |
Adjustability
On the 2019 Nissan Frontier, only the front toe is adjustable from the factory. This adjustment is made via the tie rod ends. Front camber and caster are not directly adjustable from the factory. If these angles are out of specification, it typically indicates worn components (like ball joints, control arm bushings) or damage to the suspension. In some cases, aftermarket eccentric cam bolts can be installed on the lower control arms to allow for camber and caster adjustment. Rear toe and camber are generally not adjustable on the 2019 Nissan Frontier, as it utilizes a solid rear axle. If these measurements are out of spec, it usually points to a bent axle housing or other significant suspension damage.
Recommended adjustment hardware
For correcting front camber and caster on a 2019 Nissan Frontier when within a reasonable range and not due to worn parts or damage, aftermarket eccentric cam bolt kits are the most common solution. These kits replace the factory lower control arm bolts with eccentric bolts that allow for a limited range of camber and caster adjustment. Popular brands like SPC (Specialty Products Company) offer such kits specifically designed for the Frontier. Always ensure that any aftermarket adjustment hardware is installed by a qualified technician.
Symptoms of bad alignment
Misaligned wheels on your 2019 Nissan Frontier can lead to several noticeable issues, primarily affecting tire wear and vehicle handling:
- Uneven Tire Wear: This is the most common symptom. Depending on the specific alignment issue, you might see:
- Feathering: When the tread blocks are worn smooth on one side and sharp on the other, indicating excessive toe (either toe-in or toe-out). The tire will feel rough if you rub your hand across the tread in one direction and smooth when rubbed in the other.
- Camber Wear: Excessive positive or negative camber will cause accelerated wear on either the outer or inner edge of the tire, respectively.
- Cupping/Scalloping: Irregular, scooped-out sections of wear around the tire circumference, often associated with worn shocks or unbalanced tires, but can be exacerbated by alignment issues.
- Steering Wheel Off-Center: If your steering wheel isn't straight when driving in a straight line, it's a strong indicator of an alignment problem, specifically with total toe or thrust angle.
- Vehicle Pulling: The vehicle constantly drifts or pulls to one side, requiring you to hold the steering wheel off-center to maintain a straight path. This can be caused by incorrect camber, caster, or toe on one side.
- Loose or Wandering Steering: The truck feels "floaty" or requires constant steering correction to stay in its lane, often a sign of insufficient positive caster or excessive toe-out.
- Squealing Tires: While turning at low speeds, tires may squeal due to excessive toe.
When to align
It's crucial to have your 2019 Nissan Frontier's alignment checked and adjusted in several situations:
- After Suspension or Steering Component Replacement: Any time you replace parts like tie Rod ends, ball joints, control arms, shocks, struts, or steering racks, an alignment is necessary.
- After Installing New Tires: To maximize the life of your new tires and ensure optimal handling.
- After Hitting a Significant Pothole or Curb: Even a minor impact can knock your alignment out of spec.
- Every 12,000 to 15,000 Miles or Annually: Regular checks help catch minor adjustments before they cause significant tire wear or handling issues.
- When You Notice Any of the Symptoms of Bad Alignment: Don't wait; address alignment issues promptly to prevent further damage and improve safety.
Typical alignment cost
The cost of a wheel alignment for a 2019 Nissan Frontier can vary depending on your location, the shop, and whether any seized components require extra labor. On average, you can expect to pay anywhere from $80 to $150 for a standard two-wheel or four-wheel alignment. If aftermarket adjustment hardware needs to be installed, or if seized bolts need to be freed, the cost will be higher.
Find a trusted alignment shop on Repairius.
More specs for the 2019 Nissan Frontier
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Nissan Frontier Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.