Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2019 Nissan Frontier Oil Capacity & Filter

    Everything you need to know about oil capacity, specs, and filters for your 2019 Nissan Frontier.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Nissan Frontier? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2019 Nissan Frontier takes between 3.5 quarts (3.3 liters) and 4.9 quarts (4.6 liters) of oil, depending on the engine. This guide details everything you need to know about oil changes for your 2019 Nissan Frontier.

    Quick Answer

    • 2.5L 4-Cylinder:

      • Capacity: 3.5 US quarts (3.3 Liters) with filter
      • Recommended Oil Weight: 5W-30
      • Oil Spec: API SN or later
      • OEM Oil Filter P/N: 15208-9E000
      • Aftermarket Cross-Reference:
        • Fram PH6607
        • Wix 51356
        • Mobil 1 M1-108
    • 4.0L V6:

      • Capacity: 4.9 US quarts (4.6 Liters) with filter
      • Recommended Oil Weight: 5W-30
      • Oil Spec: API SN or later
      • OEM Oil Filter P/N: 15208-9E000
      • Aftermarket Cross-Reference:
        • Fram PH6607
        • Wix 51356
        • Mobil 1 M1-108

    Capacity by Engine Option

    EngineOil Capacity (with filter)
    2.5L 4-Cylinder3.5 US Quarts (3.3 L)
    4.0L V64.9 US Quarts (4.6 L)

    Oil Change Interval

    Nissan recommends adhering to the following oil change intervals for your 2019 Frontier:

    • Normal Duty: Every 5,000 miles or 6 months, whichever comes first.
    • Severe Duty: Every 3,750 miles or 3 months, whichever comes first. This applies if you frequently drive in dusty conditions, tow heavy loads, drive mostly short distances, or in extremely hot or cold climates.

    Regular oil changes are crucial for the longevity and performance of your engine, especially given the varying demands placed on a truck like the Frontier.

    Drain Plug Torque

    • The drain plug for both 2.5L and 4.0L engines on the 2019 Nissan Frontier should be torqued to 25 ft-lbs (34 Nm). Always use a new crush washer to ensure a proper seal and prevent leaks. The crush washer helps to create a tight seal without over-tightening and damaging the oil pan or drain plug.

    How to Change the Oil

    1. Warm up the engine: Drive the vehicle briefly to bring the oil to operating temperature, allowing it to drain more easily.
    2. Lift and secure: Safely lift the front of the vehicle using a jack and secure it with jack stands. Always use appropriate safety precautions.
    3. Locate and drain: Place a drain pan under the oil pan. Remove the drain plug with a wrench and allow all the old oil to drain completely. Inspect the drain plug and replace the crush washer.
    4. Replace filter: Locate the oil filter. Use an oil filter wrench to remove the old filter. Apply a thin coat of new oil to the gasket of the new filter before threading it on by hand until snug. Do not over-tighten.
    5. Refill with new oil: Replace the drain plug and tighten it to the specified torque. Lower the vehicle. Refer to the capacity table above and add the recommended amount of new oil through the oil filler cap.
    6. Check level: Start the engine and let it run for a few minutes to circulate the new oil. Turn off the engine, wait a few minutes, and then check the oil level with the dipstick. Add more oil if necessary until it reaches the 'Full' mark.
    7. Reset maintenance light: Consult your owner's manual for instructions on how to reset the oil maintenance light, if applicable.

    Common Issues / Tips

    • Oil Consumption (4.0L V6): Some owners of the 4.0L V6 engine in this generation of Frontiers (and other Nissan vehicles utilizing this engine) have reported higher-than-average oil consumption between changes. It's advisable to regularly check your oil level, especially at the halfway point of your oil change interval, and top up as needed. Addressing this early can prevent potential engine damage.
    • Oil Filter Access: The oil filter on both engines is relatively accessible, but care should be taken to avoid spilling oil onto other engine components during removal.
    • Genuine Nissan Filters: While aftermarket filters are readily available, some owners prefer genuine Nissan oil filters (P/N 15208-9E000) for peace of mind. Ensure any aftermarket filter you choose meets or exceeds OEM specifications.
    • Synthetic vs. Conventional: While conventional oil meeting API SN or later is acceptable, using a full synthetic 5W-30 can offer enhanced protection and performance, especially in severe duty conditions or if you plan to extend your oil change intervals (though still within Nissan's recommendations).

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Nissan Frontier?

    Request service from shops in your area.

    More specs for the 2019 Nissan Frontier

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email