2020 Nissan Frontier Oil Capacity & Filter Guide
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Nissan Frontier? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer
The 2020 Nissan Frontier with the 3.8L V6 engine requires 5.4 quarts (5.1 liters) of 0W-20 synthetic oil.
- Oil Capacity: 5.4 qts (5.1 L)
- Recommended Oil Weight: 0W-20
- Oil Specification: API SN or higher
- Oil Filter (OEM): Consult dealer
- Oil Filter (Aftermarket): Fram PH6607, Wix 51356, Mobil 1 M1-108
Capacity by engine option
| Engine | Oil Capacity (quarts) |
|---|---|
| 3.8L V6 | 5.4 |
Oil change interval
For the 2020 Nissan Frontier, the recommended oil change interval varies based on your driving habits:
- Normal Duty: Every 5,000 to 7,500 miles or every 6 months, whichever comes first.
- Severe Duty: Every 3,000 to 5,000 miles. This includes frequent short trips, driving in dusty or dirty conditions, or towing.
Drain plug torque
The oil drain plug should be torqued to 25 ft-lbs. Always use a new crush washer to prevent leaks.
How to change the oil
- Warm up the engine for a few minutes to help the oil drain more easily.
- Locate the oil drain plug and oil filter underneath the truck.
- Place a drain pan under the plug and remove it.
- Once the oil has drained, replace the drain plug with a new crush washer and tighten it to 25 ft-lbs.
- Remove the old oil filter. Be sure the old filter's gasket comes off with it.
- Lubricate the new filter's gasket with a light coat of new oil and screw it on until it's hand-tight.
- Refill the engine with 5.4 quarts of 0W-20 synthetic oil.
- Start the engine and check for any leaks.
Common issues / tips
The 2020 model year was the first to feature the 3.8L V6 engine, so there is less long-term data available. However, some owners have reported higher-than-expected oil consumption. It is a good practice to check your oil level every few weeks to ensure it is within the recommended range.
Need an oil change? Find a trusted shop on Repairius.
More specs for the 2020 Nissan Frontier
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Nissan Frontier Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.