Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2025 Nissan Frontier Brake Pad & Rotor Specs

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2025 Nissan Frontier? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    SpecFrontRear
    Pad PN (OEM)Verify with dealerVerify with dealer
    Pad PN (Akebono)Verify with dealerVerify with dealer
    Pad PN (Bosch)Verify with dealerVerify with dealer
    Pad PN (Wagner)Verify with dealerVerify with dealer
    Pad PN (Power Stop)Verify with dealerVerify with dealer
    Rotor Diameter (New)~11.7 inches (Varies by trim)~11.3 inches (Varies by trim)
    Rotor New ThicknessVerify with dealerVerify with dealer
    Rotor Minimum ThicknessVerify with dealerVerify with dealer
    Caliper Piston Count21
    Caliper Bracket TorqueVerify with service manualVerify with service manual
    Caliper Slide-Pin TorqueVerify with service manualVerify with service manual
    Brake Fluid SpecDOT 3

    How to Choose Pads

    Choosing the right brake pads for your 2025 Nissan Frontier depends largely on your driving habits and expectations. Here's a breakdown of common types:

    • Ceramic Pads: These are popular for their clean operation, producing very little dust. They are also known for quiet braking and good longevity, making them an excellent choice for everyday driving and those who value a clean wheel. While they offer good stopping power, they might not be the best for extreme heavy-duty use or towing compared to other types.

    • Semi-Metallic Pads: Often the factory standard, semi-metallic pads are a blend of various metals (steel, iron, copper) mixed with friction modifiers. They provide excellent stopping power in a wide range of temperatures and are generally more aggressive, making them a good choice for light towing and hauling. The trade-off is often more brake dust and potentially more noise than ceramic pads.

    • Heavy-Duty (HD) Pads: If you frequently tow heavy loads, traverse challenging off-road terrain, or demand maximum performance from your Frontier's brakes, heavy-duty pads are the way to go. These pads are designed to withstand extreme heat and provide consistent, powerful braking under stress. They may produce more noise and dust than ceramic or standard semi-metallic pads, and their initial bite might feel different, but their performance under demanding conditions is unmatched.

    It's crucial to consider how you use your truck before making a selection. For most daily drivers, ceramic pads offer a great balance of comfort and performance. If you regularly utilize your Frontier's towing or hauling capabilities, a quality semi-metallic or heavy-duty pad will provide the necessary stopping power.

    Typical Service Life

    The service life of your 2025 Nissan Frontier's brake pads and rotors can vary significantly based on driving conditions, habits, and the type of pads installed. As a general guideline:

    • Brake Pads: You can typically expect front brake pads to last anywhere from 30,000 to 70,000 miles. Rear pads often last longer, sometimes reaching 50,000 to 90,000 miles, as there is less weight transfer to the rear during braking. Aggressive driving, frequent stop-and-go traffic, and heavy loads will shorten pad life. Conversely, highway driving with fewer stops will extend it.

    • Brake Rotors: Rotors generally have a longer lifespan than pads, often lasting between 50,000 and 100,000 miles. However, they can warp or develop significant gouges or cracks sooner, necessitating replacement. Always inspect rotors for wear, scoring, and runout whenever pads are replaced. A common interval for

    Need service on your Nissan Frontier?

    Request service from shops in your area.

    More specs for the 2025 Nissan Frontier

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email