Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2019 Nissan Titan Torque Specifications

    Your quick reference for the most common 2019 Nissan Titan fastener torque specs.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Nissan Titan? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts98 ft-lb / 133 Nm
    Oil Drain Plug25 ft-lb / 34 Nm
    Transmission Drain Plug25 ft-lb / 34 Nm
    Front Brake Caliper Bracket Bolts133 ft-lb / 180 Nm
    Front Brake Caliper Slide Pins43 ft-lb / 58 Nm
    Rear Brake Caliper Bracket Bolts81 ft-lb / 110 Nm
    Rear Brake Caliper Slide Pins24 ft-lb / 32 Nm
    Front Axle Nut136 ft-lb / 184 Nm
    Spark Plugs18 ft-lb / 24 Nm
    Valve Cover Bolts7 ft-lb / 9.5 NmTighten in sequence
    Intake Manifold Bolts8 ft-lb / 11 NmUpper and lower, tighten in sequence

    Wheel Lug Torque Pattern

    Always tighten wheel lug nuts in a star or cross pattern to ensure even clamping force. This prevents wheel warping and ensures a secure fit. Never use an impact wrench to fully tighten lug nuts; use a calibrated torque wrench for the final tightening.

    Brake Torque Notes

    Brake system fasteners are critical to safety. Always use a calibrated torque wrench when servicing brakes. Caliper bracket bolts, in particular, require high torque values. Ensure threads are clean and free of debris before assembly. For slide pins, use a high-temperature brake grease to ensure smooth caliper operation.

    Why Torque Matters

    Torque is the rotational equivalent of force. Applying the correct torque to a fastener is critical for several reasons:

    • Prevents damage: Over-tightening can strip threads or damage components. Under-tightening can allow components to loosen over time.
    • Ensures even clamping force: Proper torque ensures that gaskets seal correctly and that stress is distributed evenly across parts.
    • Safety: Critical components like wheels and brakes rely on correct torque for safe operation.

    Always use a calibrated torque wrench for critical fasteners. The values in this guide are for reference only. For critical applications, always consult the OEM service manual.

    Find a trusted shop on Repairius.

    Need service on your Nissan Titan?

    Request service from shops in your area.

    More specs for the 2019 Nissan Titan

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email