2020 Nissan Titan — Tire Size & Pressure Guide
OEM tire sizes, door‑placard PSI, wheel specs, bolt pattern, load ratings, TPMS details
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Nissan Titan? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer
- OEM tire size: 265/70R18 (S, SV), 275/65R18 (PRO-4X), 275/60R20 (SL, Platinum Reserve). Titan XD typically uses LT275/65R18 E.
- Recommended cold tire pressure (door placard): Titan (non‑XD) generally 35–36 psi front/rear depending on trim and wheel; Titan XD with LT E‑rated tires typically 60–70 psi front/rear as listed on the placard (varies by axle/GVWR).
- Bolt pattern: 6x139.7 mm (6x5.5").
- Wheel size and offset: 18x8J or 20x8J; factory offset typically +25 to +30 mm; hub bore ~77.8 mm.
- Load index/speed rating: P‑metric trims commonly 113–116 S–T; Titan XD LT E‑rated commonly 123/120S. Verify your door placard.
- Spare tire size: Full‑size steel spare matching overall diameter; commonly 265/70R18 (Titan), LT275/65R18 (XD) or 275/60R20 depending on trim.
- TPMS frequency: Most U.S.‑spec 2020 Titans use 315 MHz; some listings show 433 MHz on certain markets/late‑build units—verify by VIN or OE sensor part number.
Tire sizes by trim
| Trim (2020) | Wheel | Factory tire size(s) | Notes |
|---|---|---|---|
| S (4x2/4x4) | 18x8J | 265/70R18 P‑metric | Highway all‑season |
| SV (4x2/4x4) | 18x8J | 265/70R18 P‑metric | Some builds may show 275/65R18 |
| PRO‑4X | 18x8J | 275/65R18 (A/T) | All‑terrain tread from factory |
| SL | 20x8J | 275/60R20 P‑metric | Touring all‑season |
| Platinum Reserve | 20x8J | 275/60R20 P‑metric | Touring all‑season |
| Titan XD S/SV/PRO‑4X/Platinum | 18x8J | LT275/65R18 E | LT, Load Range E for higher payload/tow |
Note: Availability can vary by package and build date; always confirm the door placard on your driver’s door jamb.
Recommended replacement tires
- Budget highway (good ride/wear): General Grabber HTS60 or Firestone Destination LE3 — sizes 265/70R18, 275/65R18, 275/60R20 ($).
- Value all‑terrain (balanced on/off‑road): Falken WildPeak A/T3W — strong winter rating and tough sidewalls ($$).
- Premium highway touring (quiet/long life): Michelin Defender LTX M/S — excellent treadlife and wet grip ($$–$$$).
- Premium all‑terrain (off‑road focused): BFGoodrich All‑Terrain T/A KO2 — E‑load available; great for PRO‑4X/XD users ($$–$$$).
- Winter/Snow (where applicable): Bridgestone Blizzak DM‑V2 or Michelin X‑Ice Snow SUV — dedicated cold‑weather traction ($$–$$$).
Choose the same load rating as your OE tire (P‑metric for Titan; LT E‑rated for Titan XD) unless your use case demands otherwise. Recalibrate pressures when switching between P‑metric and LT tires.
When to inflate to max load psi (HD trucks only)
This applies to the Titan XD running LT Load Range E (often “Max Load 80 psi cold” on the sidewall):
- Use sidewall “max psi” only when the truck is at or near its rated axle loads (GAWR) or towing/hauling close to GVWR/GCWR where the tire is the limiting factor.
- For everyday unloaded or lightly loaded driving, follow the door placard (commonly in the 60–70 psi range on XD). Over‑inflation when empty can reduce traction and ride comfort and cause center tread wear.
- If you upgrade to different LT sizes or load ranges, use an LT load‑inflation table to match capacity to your actual axle weights.
Lug nut torque & pattern
- Lug pattern: 6‑lug; use a star/alternate tightening sequence.
- Torque spec: Typically 95–100 ft‑lb (129–136 N·m) on Titan/Titan XD. Many sources list 98 ft‑lb; always confirm in your owner’s manual or service info.
- Thread size: Most trims use M12 x 1.25 lug nuts; verify before ordering accessories.
- Re‑torque after 50–100 miles on new wheels or after tire service.
Additional wheel specs
- Bolt pattern: 6x139.7 mm (6x5.5").
- Center bore: ~77.8 mm.
- Factory offsets: generally +25 to +30 mm. Aftermarket low‑offset wheels can cause poke and fender rub; align and recalibrate TPMS if you change wheel specs.
Common tire issues for this vehicle
- Uneven wear on PRO‑4X all‑terrains if rotations are missed (rotate every 5,000–7,500 miles).
- Inside shoulder wear after lift/level kits due to altered camber/caster—get a post‑lift alignment and consider UCAs as needed.
- Ride harshness on XD when running LT E tires at high psi while unloaded—drop to placard pressures when not hauling.
- TPMS light after wheel swaps: Nissan typically uses 315 MHz on 2020 Titan; mixing 433 MHz sensors or incorrect IDs will prevent relearn.
- Vibration from heavy off‑road tires on 20‑inch wheels—road‑force balance helps; consider 18‑inch wheels for more sidewall.
- Spare tire age: full‑size spares can be original; inspect date code and tread cracking before relying on it.
Need new tires? Find a trusted shop on Repairius.
More specs for the 2020 Nissan Titan
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Nissan Titan Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.