2019 Ram 1500 Paint Codes & Color Guide

Quick Reference

Where to Find Your Paint Code

For any 2019 Ram 1500, the paint code is located on the driver's side door jamb. Open the driver's door and look for a black sticker, typically on the B-pillar (the area between the front and rear doors). This sticker contains various pieces of information about your truck, including the date of manufacture, VIN, and tire pressure data.

The paint code is explicitly labeled as "PAINT" and is usually a three-character code consisting of letters and numbers (e.g., PW7, PAR, PXJ). Always use this code from your vehicle to ensure a perfect match, as color names can be similar across different model years.

Best Touch-Up Paint Sources

Once you have your paint code, you have several excellent options for purchasing touch-up paint to fix scratches and chips:

• Dupli-Color: Widely available at auto parts stores like AutoZone and Advance Auto Parts, Dupli-Color offers a range of applicators, including pens, brush-in-cap bottles, and aerosol sprays. They provide good quality, factory-matched colors for common codes.
• AutomotiveTouchup: This online retailer specializes in perfectly matched paint for a massive range of vehicles. They are an excellent source for precision-matched colors, especially for less common shades. They sell pens, bottles, spray cans, and larger quantities for bigger repairs.
• Dealer: Your local Ram or Mopar dealership parts department can sell you touch-up paint directly. This is a guaranteed match, though it may be a slightly more expensive option.
• Tcoat Custom-Mix: For professional-level results or for tri-coat paints that require more precision, a local automotive paint supplier can custom-mix your color and load it into an aerosol can or provide it ready for a professional spray gun.

How to Use Touch-Up Paint

Achieving a near-invisible repair requires patience and the right process. Follow these steps for the best results:

1. Clean the Area: Thoroughly wash the chipped or scratched area with soap and water. Use a wax and grease remover or isopropyl alcohol to ensure the surface is completely free of contaminants.
2. Apply Primer: If the scratch is down to the bare metal, you must apply a thin layer of automotive primer first. This prevents rust and helps the base coat adhere properly. Use a fine-tipped brush or a primer pen for small chips.
3. Apply the Base Coat (Color): Shake the paint applicator (pen, bottle, or spray) thoroughly. Apply thin, even layers of your color-matched paint. It's better to apply several very thin coats than one thick, blob-like coat. Allow each layer to dry completely (usually 20-30 minutes) before applying the next.
4. Apply the Clear Coat: After the final color coat has dried, apply one or two thin layers of automotive clear coat. This protects the base coat, provides a glossy finish that matches the factory paint, and adds depth to the color.

Color Matching Tips for Pearls and Tri-Coats

Colors like Diamond Black Crystal Pearl, Ivory White Tri-Coat, and Delmonico Red Pearl require special attention. These finishes are created with a multi-layer process at the factory, making them more complex to match.

• Pearl Coats: These paints have mica flakes suspended in the paint that reflect light differently depending on the angle. The key is to apply thin, even coats to ensure the metallic/pearl flakes lay down correctly.
• Tri-Coats: A tri-coat finish like Ivory White (PWD) consists of a solid base coat, a translucent pearl mid-coat, and a final clear coat. For touch-ups, this means you will need a specific kit that includes both the base and mid-coat layers, which must be applied in the correct sequence.

For these complex colors, purchasing a kit from a reputable supplier like AutomotiveTouchup or your dealer is highly recommended, as they will provide the necessary multiple layers for an accurate match.

Find a trusted body shop on Repairius.