Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Wheel Alignment Specifications

    2018 Ram 2500 Wheel Alignment Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2018 Ram 2500? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    AngleFront PrefFront RangeRear PrefRear Range
    Camber-0.25°-0.5° to 0.0°N/AN/A
    Caster+4.0°+3.5° to +4.5°N/AN/A
    Total Toe0.20°0.10° to 0.30°N/AN/A
    Individual Toe0.10°0.05° to 0.15°N/AN/A
    SAI+9.5°+9.0° to +10.0°N/AN/A
    Thrust Angle0°-0.2° to +0.2°N/AN/A

    Adjustability

    The 2018 Ram 2500 has limited factory alignment adjustments. Front toe is the only angle that is directly adjustable from the factory. Caster and camber are not adjustable without aftermarket parts. The rear axle is a solid axle and is not adjustable. To bring caster and camber into specification, aftermarket eccentric bushings or cam bolts must be installed.

    Recommended adjustment hardware

    To adjust camber and caster on the 2018 Ram 2500, we recommend SPC Performance eccentric bushings (part #82390). These bushings provide up to 2.5 degrees of caster and camber adjustment, which is typically enough to bring the alignment into specification, even on lifted or leveled trucks. For Ram 2500s with a lift of 2" or more, adjustable control arms may be necessary to achieve proper alignment.

    Symptoms of bad alignment

    • Feathered tire wear: This is a classic sign of a bad toe setting. The tread blocks will be worn down on one side and sharp on the other.
    • Edge wear: If the inside or outside edge of your tires is wearing down faster than the rest of the tire, this is a sign of a bad camber setting.
    • Pulling to one side: If your truck pulls to one side while driving, this could be a sign of a bad caster or camber setting.
    • Crooked steering wheel: If your steering wheel is not straight when you are driving straight, this is a sign of a bad toe setting.

    When to align

    It is recommended to have your 2018 Ram 2500 aligned after any of the following:

    • Installation of new tires
    • Any suspension or steering work
    • Hitting a curb or other road hazard
    • At least once a year as part of regular maintenance

    Typical alignment cost

    A four-wheel alignment for a 2018 Ram 2500 typically costs between $120 and $200. If aftermarket parts are needed to adjust camber or caster, the cost will be higher.

    Find a trusted alignment shop on Repairius.

    Need service on your Ram 2500?

    Request service from shops in your area.

    More specs for the 2018 Ram 2500

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email